BONOSS Forged Active Cooling Hubcentric 5x110 Wheel Spacers for Alfa Romeo Giulia 952 (13)

The Ferrari Purosangue wheel adapters (also called conversion spacers) allow you to fit wheels to your vehicle when the PCD doesn’t match. This is very helpful if you would like to install other Ferrari cars’ wheels on the Purosangue. By using the wheel adapters, you can build your own PCD conversion custom specification. Giving an example, by putting a 5×114.3 to 5×130 wheel adapter on the vehicle hub that has a 5×114.3 bolt pattern on the hub side (that will fasten with the provided wheel bolts) and the wheel mounting side of the adapter will have inner lug nuts on it in a 5×130 bolt pattern. This allows 5×130 Ferrari wheels to be attached to a 5×114.3 wheel assembly. They can also be used to change the center bore of your Ferrari Purosangue, which provides the same function as the conversion hub-centric rings.

How to Install Ferrari Purosangue Wheel Adapters?

A Ferrari Purosangue wheel adapter helps you convert bolt patterns, eliminate tire rub and make up for different wheel offsets. The adapters are built with pre-installed lug nuts and come with a set of wheel bolts to make sure the adapters remain in place long term. If you are ready to install wheel adapters, the instructions below may help you walk through each step. Usually, the hub side of the adapter will be attached to the factory hub assembly and fasten with the provides wheel bolts, while the side that facing the wheel will have inner lug nuts on it in the bolt pattern of the wheel.

How to Install BONOSS Wheel Adapters

  1. Park your Ferrari Purosangue in a safe, well-lit, level area, leave the wheels in contact with the ground;
  2. Loosen all the wheel bolts, lift the vehicle and slowly remove the stock wheel;
  3. Cleaning the entire hub surface, ensuring it is clean and smooth;
  4. Place your Ferrari Purosangue adapters on the hub and ensure that the adapter is firmly seated and flush against the hub;
  5. Tighten the adapter with the provided wheel bolts to the vehicle hub to specific torque;
  6. Installing your wheel, use the stock wheel bolts to secure it;
  7. Repeat the above steps for the remaining wheels;
  8. Then your new wheels are safely installed on your Ferrari Purosangue.

Can I Customize Ferrari Purosangue Wheel Adapters?

Yes. With the combination of the independent factory, advanced production techniques, autonomous design, and abundant actual measuring data, BONOSS produces and guarantees superior and high-performance custom Ferrari Purosangue wheel adapters. The most important things we need to know are thickness and your vehicle’s bolt pattern (also called PCD). Measuring the wheel gap is the most basic beginning of determining the thickness of the adapters. It will help you find the proper thickness. The other crucial thing is the bolt pattern. If you would like to convert the bolt pattern, then you need to figure out both the bolt pattern of the factory hub of your Ferrari Purosangue and the bolt pattern of the wheels you attempt to add. We also provide non-normal thickness’s customized service, completed only in 1-3 days, 3mm-160mm thick, forged 6061-T6 (Tensile Strength≥310Mpa) or 7075-T6 (Tensile Strength≥572Mpa) Aluminum material is available, OEM/ODM is available. The color and decorative pattern of your Ferrari Purosangue wheel adapters are also available to be customized. Besides, they are made with modern CNC machinery, precision to 0.02mm tolerance, ensuring that each wheel adapter fits snugly and securely, and is built to your exact specifications.

Check the price of Custom Ferrari Purosangue Wheel Adapters Here!