Why do you need new Mercedes V167 wheel bolts? If you’re considering getting new wheels to fit your vehicle, it’s important to ensure you have the right hardware. Aftermarket wheels are designed to improve the appearance and performance of your vehicle. Since they are designed by different manufacturers, there are many differences from the original equipment factory wheels. A set of aftermarket bolt kits come with all the necessary hardware to safely secure your wheels to your vehicle. They are made based on your specific vehicle and matched up to the wheel/rim. This provides a better installing experience as well as good safety. (Thanks HANDWERKER for supporting.)
When do you need Mercedes-Benz V167 lug bolts for your new wheels? Lug bolts are standard that used to secure the wheel to European-built vehicles. When you upgrade to aftermarket wheels, equipping your vehicle with the correct lug bolts is very important to ensure the safe and reliable installation of the wheels. Depending on the wheels and vehicle hub, lug bolts vary in the thread, length, seat type, or others. Thread engagement refers to how much contact your lug bolt has, or how many complete turns before it is tight. For your safety, proper thread engagement must be met.
What are BONOSS Mercedes Wheel Bolts M15x1.25?
BONOSS M15x1.25 Lug Bolts have fully achieved ISO standard grade 12.9, tensile strength≥1,282Mpa, limited life range test≥2,000,000 stress cycles without damage, ultimate tensile load≥152,000N, hardness (HV)≥395, NSS≥192H… The shell applied forged 7075-T6 Aluminum alloy for high strength and excellent toughness meanwhile maintain lightweight for extreme performance improvement. Each BONOSS wheel bolt is “BONOSS engraved”, meaning these locking wheel bolts are made by BONOSS’s own factory, the quality is guaranteed, customers’ interests are protected, and BONOSS takes the quality responsibility.
How to Install Mercedes-Benz V167 Wheel Bolts Safely?
The Mercedes-Benz V167 wheel bolts need to be installed correctly, and they also must be properly torqued to manufacturer-recommended torque specs. This means making sure the lug bolts, wheel, and hub are secured enough to where they don’t get loosen. Untightened lug bolts (the clamping force is not enough) or overtightened lug bolts (the wheel bolt has been stretched past its tensile strength limit, so the clamping force has gone away) will cause most Mercedes-Benz lug bolts failures. Find a suitable balance in the level of tightness and the stud will remain strong, providing the greatest possible force to lock the wheel to the hub. This ensures the wheel bolts safe.
Where to Buy Mercedes-Benz V167 Wheel Bolts?
BONOSS offers a full line of Mercedes-Benz V167 wheel bolts to suit your vehicle wheels including M15x1.25, M14x1.5, M12x1.5, M12x1.25, and M14x1.25. Thus, if you would like different sizes of wheel bolts, feel free to contact us. This Mercedes-Benz V167 uses M15x1.25 thread with ball seat wheel bolts for fitting these new VOSSEN HF-3 21-inch Wheels.
BONOSS Mercedes-Benz V167 Wheel Bolts are spacer structure, which effectively eliminates the bolts loosening and abnormal noise caused by the PCD hole coaxially deviation between the wheel and hub assembly. If you would like a set of extended bolts, please ensure the seat type of the bolts is suitable for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech staff freely.
BONOSS Mercedes-Benz V167 Wheel Bolts are 10 Years Worry-free Warranty, which is an excellent and cost-effective choice for wheel upgrades. Professional production experience and excellent product quality make us confident to provide a Super Long Warranty Service up to 10 years that far exceeds the period of most brands.
Interested in purchasing? Click HERE to know more!