BONOSS Forged Lightweight Plus Porsche 911 Wheel Spacers 7mm Special Hubcentric Design (1)

What do Porsche 911 wheel spacers do? Distortions in the offset or other suspension clearance issues make a wheel modification not ideal. These cases call upon the 911 wheel spacers to be installed. Many 911 owners often install wheel spacers to achieve more stability especially while turning or cornering the vehicle. The vehicles become more stable as the wheel spacer provides additional width for the wheel track. Most cars come with a ring-type hub structure design. But the new Porsche 911 models are equipped with the three-fingered style hub structure. Considering this special construction, the traditional hub-centric wheel spacers may not suit properly the three-fingered style hub, leaving a certain clearance.

BONOSS-Forged-Lightweight-Plus-Wheel-Spacers-for-Porsche-911-(1)

In this case, BONOSS independent design department has designed these Porsche wheel spacers to fit the three-fingered hub. The spacers come with Porsche style hub-centric locking fingers and notches on the back for perfect suitable mounting. This allows the wheel spacers to be truly attached to the vehicle hub, ensuring the hub carries the weight of the car instead of the bolts, meaning no additional force, no vibration, no annoying noise, less energy loss, less fatigue damage, longer service life. There are many universal wheel spacers manufacturers advertise that their spacers can perfectly fit the Porsche style wheel hub, in fact, that means those spacers do not come with hub-centric lip. In most cases, hub-centric spacers provide better stability than lug-centric ones. (Thanks to the owner for supporting)

BONOSS Forged Lightweight Plus Porsche 911 Wheel Spacers 7mm Special Hubcentric Design (2)

Are Porsche 911 Wheel Spacers Actually Safe?

Yes. We’ve seen them work successfully on race cars countless times, as long as you use high-quality 911 spacers and install them properly, wheel spacers are exactly safe. The tensile strength of the 911 wheel spacers is the maximum amount of tensile stress that it can be subjected to before failure. So, if a 911 wheel spacer has high tensile strength, it essentially means that it can resist a lot of tension before it breaks. Compared to some cheap casting wheel spacers, BONOSS forged Porsche 911 wheel spacers are safer and stronger: Tensile Strength≥310Mpa (AL6061-T6), Tensile Strength≥572Mpa (AL7075-T6), and the Tensile Strength of the cheap alternatives is approximately 125Mpa below. When facing bump and impact loads, higher tensile strength can bear greater forces without breaking.

BONOSS-Forged-Lightweight-Plus-Wheel-Spacers-for-Porsche-Special-Hubcentric
BONOSS Forged Lightweight Plus Porsche 911 Wheel Spacers 7mm Special Hubcentric Design (3)

Where to Buy Wheel Spacers for Porsche 911?

  • BONOSS has 3mm-20mm Porsche 911 wheel spacers 5×130 in stock. We also offer non-normal thickness’s customized service, completed only in 1-3 days, 3mm-160mm thick is available, OEM/ODM is available. Common requests from our customers include PCD conversion, CB conversion adapters for aftermarket wheels (e.g., 5×130 to 5×120 wheel adapters, 5 lug to 6 lug adapters, 5×130 to 5×112 wheel adapters).
  • BONOSS Porsche 911 extended bolts are available to conical seats, ball seats, and flat seats, etc. There may be differences in aftermarket wheels, so please take a check on your new wheel rims. If you would like a set of extended bolts, please ensure the seat type of the bolts is suitable for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech staff freely.
  • BONOSS Porsche 911 Wheel Spacers are 10 Years Worry-free Warranty, which is an excellent and cost-effective choice for wheel upgrades. Professional production experience and excellent product quality make us confident to provide a Super Long Warranty Service up to 10 years that far exceeds the period of most brands.

Interested in purchasing? Click HERE to know more!

Get your Porsche 911 Specific Wheel spacers now!