This excellent BMW E92 M3 gets BONOSS Forged Titanium Wheel Stud Conversion, 20-in BBS Wheels, and Brembo Brakes installed for a more competitive stance. What does BMW stud conversion do? It includes 20 pcs of special studs with both ends threaded, which convert your wheel bolts fastening method to lug nuts. If you’ve ever changed your stock wheels to aftermarket wheels, you can use a stud conversion kit with various lug nuts for wheel fitment. The wheel bolts fastening method adds the hassle of lining up the wheel and brake rotor when mounting wheels/tires. Then, these M3 E92 wheel stud conversion offers an easy way to align the wheel. They make it more fluent to change wheels and save much time for you.
What are the advantages of installing a Titanium wheel stud conversion kit? BONOSS Forged Titanium Exposed Wheel Stud Conversion Kit for BMW M3 E92 applies forged Titanium alloy material. The Titanium alloys are light in weight (each Titanium stud only weighs 62g) as well as very strong. They feature great fatigue strength and tensile strength, hard and high-temperature resistance. Even at extreme temperatures up to 400 to 500°C, they maintain great performance. BONOSS Titanium wheel studs are fully TÜV ISO standard test reports certificated, truly guarantees safety: Tensile Strength≥1,080Mpa, Ultimate Tensile Load≥138,800N, Proof Load≥104,000N and Hardness(Vickers)≥347. Very suitable for racing!
Installing BONOSS Titanium Stud Conversion Before
Installing BONOSS Titanium Stud Conversion After
Are BMW Wheel Stud Conversions Safe?
Typically, these BMW wheel stud conversions are made of Titanium alloy, which are treaded in the wheel hub assembly and locking the wheel with lug nuts. They convert the wheel bolts fasten method to wheel studs and lug nuts and providing a more aggressive stance and improve the experience of changing wheels. We’ve seen them work successfully on race cars countless times, as long as you use a high-quality BMW stud conversion kit and install them properly, they are exactly safe. When facing bump and impact loads, higher tensile strength can bear greater forces without breaking.
How to Properly Install BMW Wheel Stud Conversion?
Properly installing your BMW stud conversion is important to keep safe. It is quite simple, almost can be done in a few hours:
Firstly, install the short thread end on the vehicle hub, and then tighten it with an inner hex key. The size of the inner hex key should be 6mm (torque: 20N.m.).
Second, after fastening, align and mount the wheel, then use a torque wrench and a 19 size extended socket to install the lug nuts.
Finally, use a torque wrench and 19mm extended socket for reinforcement after landing the vehicle, the torque will be 140-150N.m.
Where to Buy Wheel Stud Conversion Kit for BMW M3 E92?
BONOSS BMW wheel stud conversion kit is compatible with both ball and conical seat lug nuts, which is suitable for most factory or aftermarket wheels. Thus, it is needed to choose suitable lug nuts according to the seat type of your wheels to ensure safe fastening.
The BMW stud conversions’ thread length is capable to adjust. If you would like to install wheel spacers, please ensure the length of the studs is enough for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech staff freely.
Each BONOSS BMW Titanium Wheel Stud Conversion is printed with the logo of “BONOSS”. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our Titanium products are 12 Months Worry-free Warranty, which is an excellent and cost-effective choice for your car upgrades.
Interested in purchasing? Click HERE to know more!