Are BMW wheel stud conversions safe? How do you install a BMW M2C wheel stud conversion kit? Here is an example from this BMW M2C. European cars normally use lug bolts to secure wheels. When removing and installing wheels, the process can be troublesome, lining up the bolt holes, holding the wheel up with your legs, then cross-threading the bolts at the same time. Wheel bolts are actually not as convenient as wheel studs. Then wheel stud conversion kit provides an easier and stronger fasten method than using the stock wheel bolts for your BMW M2C. These M2C stud conversions also allow for the safe use of various thickness wheel spacers. It is a much quicker method to swap wheels during track days.
What is a BMW stud conversion? Wheel Stud Conversion is a kind of special stud with both ends threaded. The short end is threaded in the hub assembly according to the factory size and tightened with the required torque. On the other end, the wheel is fastened with lug nuts. It offers an easy way to align the wheel, which makes it more fluent to change wheels. If you really like studs with an aggressive look or need to install different thickness BMW wheel spacers, then a stud conversion kit would be very suitable for you. The studs’ length is capable to adjust to get proper fasten, you do not have to change to another set of extended bolts.
Are BMW Wheel Stud Conversions Safe?
Typically, these BMW wheel stud conversions are made of Titanium alloy, which are treaded in the wheel hub assembly and locking the wheel with lug nuts. They convert the wheel bolts fasten method to wheel studs and lug nuts and providing a more aggressive stance and improve the experience of changing wheels. We’ve seen them work successfully on race cars countless times, as long as you use a high-quality BMW stud conversion kit and install them properly, they are exactly safe. When facing bump and impact loads, higher tensile strength can bear greater forces without breaking.
What is BMW Wheel Stud Conversion Made of?
BONOSS Forged Titanium BMW Wheel Stud Conversion applies Titanium alloy material. The Titanium alloys are light in weight (each Titanium stud only weighs 62g) as well as very strong. They are fully TÜV ISO standard test reports certificated, truly guarantees safety: Tensile Strength≥1,080Mpa, Ultimate Tensile Load≥138,800N, Proof Load≥104,000N and Hardness(Vickers)≥347. A thin oxide (TiO2, titania) layer spontaneously forms cover on the surface, which gives them extraordinary corrosion resistance ability. Each stud conversion is processed Hard-Anodized/Polished surface treatment, smooth 100%, no scratches.
Where to Buy Wheel Stud Conversions for BMW M2C?
BONOSS BMW wheel stud conversion kit is compatible with both ball and conical seat lug nuts, which is suitable for most factory or aftermarket wheels. Thus, it is needed to choose suitable lug nuts according to the seat type of your wheels to ensure safe fastening.
The BMW stud conversions’ thread length is capable to adjust. If you would like to install wheel spacers, please ensure the length of the studs is enough for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech staff freely.
Each BONOSS BMW Titanium Wheel Stud Conversion is printed with the logo of “BONOSS”. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our Titanium products are 12 Months Worry-free Warranty, which is an excellent and cost-effective choice for your car upgrades.
Interested in purchasing? Click HERE to know more!