1. Remove original wheel bolts and wheel.
  2. Put BONOSS Wheel Spacer on hub of car (where hold the wheel) Please ensure that the spacer is fully seated and flush with the hub.
  3. Put wheel onto the spacer and match the wheel & spacer bolt holes and mounting hole.
  4. Insert new longer BONOSS wheel bolts. Carefully hand turn bolts making sure that they spin in easily and fit well.
  5. Repeat above step with the bolts left.
  6. Use hand wrench to tighten extended bolts in a star pattern.
  7. Spin the wheel and tire to check whether it cause any noise or interference or not before fully tightening bolts.
  8. Use torque wrench set with wheel manufacturers’ specifications to tighten the longer bolts in a star pattern.