- Remove wheel.
- Place BONOSS Wheel Spacer on hub axle of vehicle making sure that the spacer is fully seated and flush with the hub.
- Use BONOSS lug nuts to tighten wheel spacer to original studs. Carefully turn the nuts by hand to make sure they are easy to screw in to avoid cross-thread.
- Repeat step 3 with the rest of lug nuts.
- Tighten the lug nuts to the star pattern with a wrench.
- Use a torque wrench specified by the manufacturer to snug up the lug nuts in a star pattern.
- Ensure the original studs do not protrude past wheel spacer surface.
- Install the wheel on the new studs and let it firmly against the wheel spacer.
- Secure the wheel with the factory lug nuts. Carefully turn the lug nuts by hand to make sure they are easy to screw in to avoid cross-thread.
- Repeat step 9 with the rest of lug nuts.
- Tighten the lug nuts to the star pattern with a wrench.
- Before fully tightening, turn the wheel and tire to check check whether there have any noise or interference.
- Use a torque wrench specified by the manufacturer to snug up the lug nuts in a star pattern.