To tell the truth, the Ferrari Purosangue wheel spacers are exactly safe to use. They can solve a lot of problems to make your wheel installation nice and easy. A common misconception about wheel spacers is that they will have a bad effect on your wheel bearings. If properly installed, your Ferrari Purosangue wheel spacers will not cause the wheel bearings to fail prematurely or suddenly. As long as you are using high-quality wheel spacers and they are specifically fit, there will be no problems. In decades, wheel spacers are used for various reasons, such as adding track width, helping to clear brakes clearance issues, or helping alleviate tire rubbing. They make your wheel setup even safer. Make sure that you get wheel spacers from a reputable company. If you get the wheel spacers to sit and tight perfectly, you won’t run the risk of excessive vibrations or damages to your Ferrari Purosangue.
How to Keep Ferrari Purosangue Wheel Spacers Safe?
Typically, the Ferrari Purosangue wheel spacers are safe. But this entails some rules to keep them safe:
- They should be specifically made for your Purosangue and of appropriate sizes (too thin, you will still have clearance issues; too thick, the tires may hit the fenders).
- Use high-quality wheel spacers or adapters from a reputable store. Quality Purosangue spacers would use forged billet aluminum material (6061-T6 or 7075-T6 is better). This material ensures they can withstand a large load when driving down a road or on the trail.
- Use precise hub-centric wheel spacers rather than universal lug-centric spacers. Hub-centric wheel spacers allow the wheel to support the vehicle’s weight and fill the remaining space for a more tightly fit, reducing vibration, so they are considered safer.
- If you are using slip-on wheel spacers, make sure you have longer wheel bolts to achieve a full thread engagement. Wheel bolts are very important parts to secure the spacers and wheels, higher strength wheel bolts provide stronger load-bearing capacity.
- If the wheel bolts are not strong enough to support this force, they will likely be bent by road impacts. Use wheel spacers with high-strength wheel bolts (grade 12.9) to ensure the wheels are safely fastened.
- Follow the guide of included instructions when installing these parts. These Ferrari Purosangue wheel spacers need to be installed securely. At the final installation step, a torque wrench should be used to torque the wheel bolts to appropriate tension.
When it comes to the safety of Ferrari Purosangue wheel spacers, don’t skimp with cheap unbranded products. You’ll regret it in the long run, just get the safe and quality option. It is recommended to get your wheel spacers installed at a reputable wheel shop. If you would like to install them on your own at home, then please follow the guide of included instructions. As a precaution, it is always a great idea to regularly inspect and give the spacers another check after 25,000 miles of driving to make sure they’re still in place well and the wheel bolts are tight. Authentic stores that are able to customize to your needs can provide products made with genuine quality and help you avoid deception by unscrupulous merchants.
