The main purpose of the 2022 Tesla Model X wheel spacers is to create an ideal space between the vehicle hub and wheels. Whether it’s because you’ve added big brake kits, custom aftermarket wheels, or just desire to widen your car’s stance aesthetically, you’ve concluded that wheel spacers are the most cost-effective way to do the trick for you, and will solve your fitment dilemma. They are installed on the studs of the hub assembly and in return attach the wheels to them. As the track width increases, the amount of grip that your 2022 Model X has in corners enhances, allowing faster cornering. The further the wheel is from the vehicle hub, the better roll resistance ability and the better the appearance. However, the thicker 2022 Tesla Model X wheel spacers you put on, the more your wheels will be pushed out. This may cause a rubbing problem. When 2022 Tesla Model X wheel spacers are needed, before purchasing, calculating the perfect spacer thickness is essential.
Methods to Measure 2022 Tesla Model X Wheel Spacers
To figure out what size of 2022 Tesla Model X wheel spacers you need, the wheel gap and offset are two critical factors. The wheel gap is the amount of space between the inner fender lip and the outside edge of your wheel tires or rims. Every car’s wheel gap is various, even if they are the same exact cars, the wheel gap of the front wheel and the rear wheel is different. And the wheel offset is the distance in millimeters from the wheel’s centerline to the mounting plate of the wheel. The lower the offset, the more your wheels will stick out.
- If you have a straight edge metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size spacer you will need to achieve the look that flushes or nearly flushes with the fender. For instance, if the value is 25mm, then it is recommended to use less than 25mm wheel spacers.
- Calculate the wheel offset. The 2022 Tesla Model X wheel spacers are components that lower the offset. Giving your stock wheel offset is 35mm. If you get 40mm offset wheels installed, you will find that the wheels tuck in the fender. This certainly doesn’t create a sporty look. In this case, a 15mm wheel spacer will push the wheel outwards, which corrects the wheel offset to 35mm. To improve the aesthetics, you can use thicker spacers. But don’t exceed the value of the wheel gap.
Do I Have to Trim Studs for 2022 Tesla Model X Wheel Spacers?
After installing 2022 Tesla Model X wheel spacers, it seems that the protruding OEM studs will cause the wheel not to sit flush against the hub flange. Should I cut the OEM studs for wheel spacers? Do not worry, take a look at the inside of your wheels first. Check out whether the mounting plate has pockets machines into it and isn’t solid. If there are pockets, then measure the cavity in your wheels to find out how much it will allow for the stud to go past the spacer outer surface. Giving an example, if the depth of the wheel pocket is 15mm, and the OEM stud length is 30mm, then the minimum thickness of the 2022 Tesla Model X wheel spacers that will perfectly fit is 15mm (30 – 15 = 15). If the cavity is not deep enough, then changing to thicker 2022 Tesla Model X wheel spacers will be OK. If the depth of the wheel pocket is 8mm, and the OEM stud length is 30mm, then the minimum thickness of the wheel spacers will be 25mm (8 + 25 ≥ 30). In this case, a 25mm wheel spacer will recess all the lugs in it, so you don’t need to trim any studs.
