BONOSS Forged Active Cooling Wheel Spacers 25mm+25mm for Ford Edgecaid43152021-02-26T02:29:32+00:00
Better control performance! Yesterday, this Ford Edge installed BONOSS Forged Active Cooling Wheel Spacers, front/rear 25mm (1 inch), PCD 5×108, CB 63.4. What do wheel spacers do? If you have upgraded your brake system with bigger brake calipers and still want to keep the current wheels attached to your vehicle without scratching, you can use a set of wheel spacers. Wheel spacers are used to create necessary distance on the inner portion of the wheel for clearance problems with brakes, tie rods, and other suspension components. By pushing out the wheel, you can gain the ideal amount of clearance for a bigger brake caliper instead of rubbing against it when mounting back the wheel. (Thanks to the owner for supporting)
The Ford Edge is a delightful performance SUV. The premium interior, comfortable seats, energetic power offer more enjoyable to drive than most of its peers. Although automakers do require their suppliers to comply with specific standards for quality and performance, these standards are often not good enough for discerning consumers. Therefore, many car enthusiasts choose to upgrade from the original equipment manufacturer (OEM) parts. The owner of this Ford Edge chooses to begin with the brake system, which is an easy but high reward selection.
Why Choose BONOSS Wheel Spacers?
BONOSS Forged Active Cooling Wheel Spacers are designed to maximize the performance of your vehicle, giving it more stability, better cornering, and an awesome exterior. The body of BONOSS wheel spacers applied advanced black hard coat anodizing technology which is a proven very useful electrochemical coating process that provides both predominant corrosion-resistance durability and an excellent appearance. These wheel spacers are made by modern CNC 0.02mm tolerance machining to the highest possible quality. All BONOSS wheel spacers are matching with all necessary hardware components including wheel lug nuts or wheel bolts to suit your vehicle.
Effective Dismounting Grooves Design
Dismounting grooves means the small notches which are distributed on the corner of wheel spacers. It is designed to easily dismount the spacers, improving the user experience. Normally, it leaves a limited clearance between the axle plate and spacer, using a screwdriver can easily remove the spacers, simple and efficient. If there is no such groove, the spacer will snug the vehicle hub, by forces effect, it can be difficult to dismount. Even worse, you may destroy the spacers or axle hub. Furthermore, the grooves can act as an air collecting funnel, which is effectively increasing airflow, enhancing the heat dissipation effect.
BONOSS wheel spacer thickness can be customized flexibly, which is compatible with most vehicles. Thus, if you would like different sizes of wheel spacers, feel free to contact us. This Ford Edge uses front/rear 25mm (1 inch), PCD 5×108, CB 63.4.
The matching wheel studs are made of JIS SCM44o high-strength steel, which features many desirable properties such as high strength, wear-resistance, excellent toughness, impact resistance, and high-temperature resistance. All BONOSS wheel adapter kits are matching with all necessary hardware components including wheel lug nuts or wheel bolts to suit your vehicle.
Each BONOSS product is printed with the logo of “BONOSS”. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our products are 10 Years Limited Warranty (new products with 12 months warranty), which is an excellent and cost-effective choice for your car upgrades.
Interested in purchasing? Click HERE to know more!