BONOSS Forged Lightweight Plus Wheel Spacers 10mm & Forged Extended Wheel Bolts for Ferrari F12 Berlinettacaid43152020-11-11T09:23:13+00:00
Several days ago, this Ferrari F12 Berlinetta installed BONOSS Forged Lightweight Plus Wheel Spacers, front 10mm (2/5”) as well as BONOSS Forged Grade 12.9 Extended Wheel Bolts. Both of them are specifically designed for this vehicle and achieve a higher-level handling performance, meanwhile, showcase a remarkable look. They suit perfectly with the factory wheels, due to the precise manufacturing. And the hub centric design makes a snug connection between wheel and axle hub, ensuring no vibrations through the wheels. Click the video on the left, let Cami show you her tuning work for this Ferrari F12 Berlinetta.
Undoubtedly, the Ferrari F12 Berlinetta is one of the most potent naturally aspirated supercars in the world. The powerful performance, avant-garde design and top technology make it to be a great supercar which is as surging as it behaves, as energetic as it performs. The highlight is the 6.3-litre, 200-bar, V-12 engine, which provides a great 730bhp (545kW) of power and 690 Nm of torque, with a seven-speed twin-clutches automatic transmission, rear-wheel drive.
What do wheel spacers do for the Ferrari F12?
The accelerated result of this F12 is very impressive: 0-100km/h in 3.1 secs, 0-200km/h in 8.5 secs, and top speed at 340km/h plus. It’s truly amazing to achieve this kind of power and performance, also it is more enjoyable at low speeds. And installing a set of wheel spacers can not only correct offset, enhance the ability to turn, providing a fluent handing experience but also offers a more excellent look. BONOSS forged lightweight plus wheel spacers upgrade the vehicle both appearance and performance to a higher level.
BONOSS Forged Grade 12.9 Extended Wheel Bolts
After installing wheel spacers, the factory wheel bolts will not be long enough, reducing the number of laps for threading. In the case of intense driving, it will cause kinds of security issues. Thus, need a new set of extended bolts. High-quality bolts for a high-end vehicle. BONOSS Forged Grade 12.9 Extended Wheel Bolts applies SCM440 high strength steel material, which provides extremely high performance: Tensile Strength ≥ 1220MPa; Limited Life Range Test ≥ 2000000 Stress Cycles; Neutral Salt Spray Test ≥ 192H (Results from SGS, TUV authoritative testing reports).
BONOSS wheel spacer thickness can be customized flexibly, which is compatible with most vehicles. Thus, if you would like different sizes of wheel spacers, feel free to contact us. This Ferrari F12 Berlinetta uses front 10mm(2/5″), PCD 5×114.3, CB 67.1.
The extended bolts are spacer structure design, which effectively eliminates the bolts loosening and abnormal sound caused by the PCD hole coaxially deviation between hub and shaft head. If you would like a set of extended bolts, please ensure the seat type of the bolts is suitable for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech stuff freely.
Each BONOSS product is printed with the logo of “BONOSS”. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our products are promised warranty, which is an excellent and cost-effective choice for your car upgrades.
Interested in purchasing? Click HERE to know more!