Project Description

Audi A6 C8 Quattro

BONOSS Forged Lightweight Plus Wheel Spacers

BONOSS Shell Type Lock Bolt Kits (Golden)

BONOSS shell type lock bolt kit (1).jpg

Here is the installation example received from the customer:

Audi A6 C8 Quattro choose BONOSS  Forged 6061-T6 Lightweight Plus Wheel Spacers (Formerly BLOXsport) and BONOSS Shell Type Lock Bolt Kit (Golden). Front 12mm (0.5inches), rear 15mm (0.6 inches), PCD 5×112, CB 66.5, Bolts M14x1.5. After the installation of wheel spacers, we got a fuller appearance, the wheels flush with the fenders. The Wheel Spacers are installed with specific length extended bolts, BONOSS provides the right size extended bolts to match wheel spacers thickness and stock bolts length.

The biggest feature of Lightweight Plus wheel spacer is its weight: as a piece of wheel spacer, we chasing for it extremely lightweight and strong mechanical properties, 6061-T6 and 7075-T6 material always be the first choice for most customers. We have accurate data to support our products, 12mm 7075-T6 wheel spacer only weight 279g and a piece of BONOSS Shell Type Lock Bolt only weight 102g.

What do Shell Type Lock Bolt Kit do?

The product is named by BONOSS and this latest product is welcomed by many customers, short type and long type can be selected by customers, the product upgrade the appearance of bolt, match the bolt with a shell, that is the reason why BONOSS name it shell type. The shell has two functions. First, protect the wheel bolts from debris and water corrosion, extend the service life of wheel bolts. On the other hand, the trend of modding our unique cars is a part of car culture. We hope every car is special for every driver, even a piece of bolt.

Audi A6 C8 Quattro BONOSS Forged Lightweight Plus Wheel Spacers and 12.9 Bolts

Audi A6 C8 Introduction:

The new A6 was unveiled ahead of the 2018 Geneva Motor Show, and went on sale in June 2018. All engines are offered with a mild hybrid drivetrain that can reduce fuel consumption by up to 0.7 litres per 100 kilometers for the V6-engined vehicles. All engines can be had with mild hybrid technology which can increase economy by about 3mpg in V6 models.(reference: drivetribe)The new C8 carries with a host of driver assistance technologies, help the driver in lane-keep assist and lane departure warning.

Aesthetically, the C8 is a masterpiece, the designer Philippe Romers did a good god of car exterior appearance, it’s wonderful.

Audi-A6-C8-Quattro-BONOSS-Forged-Lightweight-Plus-Wheel-Spacers-and-12.9-Bolts

Audi A6 C8 Wheel Parts:

Audi A6 C8 Brakes

Audi A6 C8 Wheels

BONOSS Forged Lightweight Plus Wheel Spacers(Formerly BLOXsport)

BONOSS Shell Type Lock Bolt Kits

Audi-A6-C8-Quattro-BONOSS-Forged-Lightweight-Plus-Wheel-Spacers

BONOSS Forged 7075-T6 shell type lock bolt kit

BONOSS Shell Type Lock Bolt Kits

Grade 12.9 Bolt + Forged 7075-T6 Shell

The product adopt SCM440 material as the material of bolt. It is a commonly used steel grade for the production of high-strength fasteners. The product has the advantages of stable composition, low harmful elements, high steel purity, small decarburization layer, and few surface defects. The heat treatment quality is stable and the hardness is uniform. The ball and conical seat bolts can be selected according to the stock bolt seat. In addition, different length also can be selected (25-75mm) in case of installing the wheel spacers. The shell is made of 7075-T6 material, 8 colors can be selected.

BONOSS shell type lock bolt kit

We are proud that the product pass TUV, SGS standard, TUV and SGS actual test report performance parameters are as follows: (Tested by authoritative third-party SGS TUV certification)
Tensile Strength ≥ 1220MPa
Ultimate Tensile Load ≥ 152000N
Proof Load ≥ 121000N
Limited  Life Range Test ≥ 2000000 Stress Cycles Without Damage
Neutral Salt Spray Test ≥ 192H
BONOSS focus on the best quality for every customer.

Additional Information:

  • BONOSS wheel spacer thickness can be customized flexibly, which is compatible with most vehicles. Thus, if you would like different sizes of wheel spacers, feel free to contact us. This Audi A6 C8 uses front 12mm (0.5 inches), rear 15mm (0.6 inches), PCD 5×112, CB 66.5, Bolts M14x1.5.
  • The extended bolts are shell structure design, which effectively protect the bolts from rusting. This Audi A6 C8 uses ball seat bolts. If you would like a set of shell type lock bolt kit, please ensure the seat type of the bolts is suitable for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech staff freely.
  • Each BONOSS product is printed with the logo of “BONOSS”. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our products are 10 Years Limited Warranty (new products with 12 months warranty), which is an excellent and cost-effective choice for your car upgrades.

Interested in purchasing? Click HERE to know more!