BONOSS Forged Lightweight Plus Wheel Spacers 15mm+20mm for Volvo XC60 T6caid43152021-01-28T01:39:58+00:00
Higher-level performance! Last Sunday, this Volvo XC60 T6 installed BONOSS Forged Lightweight Plus Wheel Spacers, front 15mm (3/5 inch), rear 20mm (4/5 inch), PCD 5×108, CB 63.4 together with BONOSS Forged Grade 12.9 Extended Wheel Bolts. What do wheel spacers do? If you would like to bolt up wheels that are made with a bigger center diameter for your car, then wheel spacers can be your most cost-effective option. The hub-centric design makes a snug connection between the axle hub and the wheels, meaning no gap, no vibrations, fewer stress loads, and more service life range. Besides, by pushing out the wheels to an ideal distance, wheel spacers give your car a more aggressive exterior and a better aerodynamics body. (Thanks TOPSPEED for providing these pics)
The Volvo XC60 T6 is an elegant, unique SUV that offers an avant-garde design, exquisite interior, comfortable seats, and a modern cabin. It offers advanced technology and lavish features to make the ride more joyful. The Volvo XC60 T6 is powered by an inline 4 turbo engine, delivering 316 hp at 5700 rpm as well as 295 lb-ft torque at 2200 rpm. An 8-speed automatic with manual shifting mode transmission offers a smooth, sharp switch and a variable all-wheel-drive system provides engaging handling. Plenty of driver-assistance features are on hand to back up Volvo’s reputation for safety.
Are wheel spacers safe on Volvo XC60?
Wheel spacers are sandwiched between the assembly hub and wheel. The wheel lugs apply a clamping force to secure the spacer and wheel to the vehicle hub. When the lug nuts are properly tightened, the wheel studs will stretch elastically (like very stiff springs) to keep everything in the right place. The common myth is that wheel spacers wreck the physics of the wheels and wheel hubs. This is actually incorrect because installing a wheel spacer between the hub and wheel will not change these physics. As long as you use high-quality spacers and install them properly to prevent flexing and loss of clamp force, wheel spacers are a very safe mod for your vehicle.
Why do you need extended wheel bolts?
Any time you run wheel spacers, extended wheel bolts are a must option to properly secure the wheel to the vehicle hub. Without the proper thread length, the stock lug bolts will not allow penetrating the vehicle hub threads completely which can cause car shaking or safety risk. BONOSS Forged Grade 12.9 Extended Wheel Bolts are made by the forged process. The forging process offers lots of advantages over other manufacturing processes for wheel bolts, such as high tensile strength and tough, better wear resistance and higher fatigue strength, elimination of porosity, evenly and tight internal structure, good polishing and finishing surface characteristics.
BONOSS wheel spacer thickness can be customized flexibly, which is compatible with most vehicles. Thus, if you would like different sizes of wheel spacers, feel free to contact us. This Volvo XC60 T6 uses front 15mm (3/5 inch), rear 20mm (4/5 inch), PCD 5×108, CB 63.4.
The extended bolts are spacer structure design, which effectively eliminates the bolts loosening and abnormal sound caused by the PCD hole coaxially deviation between hub and shaft head. This Volvo XC60 T6 uses conical seat bolts. If you would like a set of extended bolts, please ensure the seat type of the bolts is suitable for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech staff freely.
Each BONOSS product is printed with the logo of “BONOSS”. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our products are 10 Years Limited Warranty (new products with 12 months warranty), which is an excellent and cost-effective choice for your car upgrades.
Interested in purchasing? Click HERE to know more!