Project Description

Late last week, an Audi S3 8V installed BONOSS Forged Titanium Exposed Wheel Stud Conversion, which offers an easier wheel mounting method as well as a shiny personalized appearance of wheels. Particularly, this 8V S3 role as a track car for years, through many times of tuning. So why the owner of this S3 chooses to use a stud conversion kit?

Car racing games may be one of the most enjoyable events all over the world. The sense of speed, the forces of steering and the rapid pounding of the heart are extremely fantastic! The faster you roll, the closer to the mechanical limit, the larger passion. For that reason, car personalization has become an important element of the motorsport game.

There is no doubt that car tuning is a rewarding project. Not only does it dramatically improve the capabilities and performance of the entire racing experience, but more particularly, it provides a chance to show off our personality on the cars as if we actually own and care about them. One of the most essential options is the wheels. The right wheels are vital to making the most of your speed.

BONOSS-Titanium-Wheel-Titanium Stud-Conversion-for-Audi-S3-8V

However, most aftermarket wheels are made with larger center diameters. Due to the larger center diameter of the wheel, there is a certain gap between the axle and the hub, which means that the wheel is centered by the lug studs rather than by the axle hub. Without the firm contact, lacking the hub’s support, some fierce impacts are strong enough to deform the studs, making the wheel no longer concentric with the hub, resulting in vibrations. That is not safe for a race.

Therefore, this S3 uses a wheel stud conversion kit to fit wheel upgrades.  The stud’s thread length can be flexible adjusted, which means that it can be safely installed the proper size of wheel spacers to pass larger brake calipers as well as mount aftermarket wheels with different center diameters.

Indeed, converting your vehicle to wheel studs and lug nuts is a simple but highly rewarding upgrade that can be completed in a few hours. Stud conversion provides an easier wheel mounting method, no more holding wheels a long time to align the bolts holes repeatedly, no more threading wheel hangers in and out which can be troublesome, no more worrying about scratching the brake calipers. Every second counts, no need to waste time on wheel changing.

BONOSS Forged Titanium Wheel Stud Conversion for Audi S3 8V 2020

BONOSS Forged Titanium  Exposed Wheel Stud Conversion for Audi S3 8V

BONOSS-Forged-Titanium-Wheel-Titanium Stud-Conversion-for-Audi-S3-8V

BONOSS Forged Titanium Exposed Wheel Stud Conversion for Audi S3 8V

  • The Audi 8V S3 is a four-wheel drive Sportback powered by a 2.0 TFSI engine, which is as the same engine as the Golf R. The motor of the 8V has been greatly enhanced with stronger pistons, advanced rings and reinforced connecting rods, a larger turbocharger (which supplied maximum boost pressure of up to 1.2 bar), a high-performance intercooler that was integrated into the water circuit. It is a mix of high-performance and high-tech. After AZN Stage 2 Tuning, this Audi 8V outputs reach up to 420-hp, the acceleration ability is greatly improved. With the cooperation of new wheels which fastened by BONOSS wheel studs, the 8V won the Fast4ward 1/4 Mile Drag Racing Group Champion.

BONOSS Forged Titanium Exposed Wheel Stud Conversion applies Titanium alloy material. The Titanium alloys possess high mechanical properties, not only have great fatigue strength and tensile strength performance but also maintain great strength at extreme temperatures up to 400 to 500°C. They are light in weight, also have extraordinary corrosion resistance-a thin oxide (TiO2, titania) layer spontaneously forms cover on the surface to protect them against corrosion. They have been used as various components, such as military applications, aircraft, spacecraft, medical devices, jewelry, expensive sports car parts and some premium sports equipment and consumer electronics.


Safety Information:

  • BONOSS wheel stud conversion kit is compatible with both ball and conical seat lug nuts, which is suitable for most factory or aftermarket wheels. Thus, it is needed to choose suitable lug nuts according to the seat type of your wheels to ensure safe fastening. This Audi S3 8V uses ball seat lug nuts.
  • The studs’ thread length is capable to adjust. If you would like to install wheel spacers, please ensure the length of the studs is enough for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech stuff freely.
  • Each stud conversion short thread end is printed with the logo of BONOSS, the long thread end is carved with our brand doll. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our products are promised warranty, which is an excellent and cost-effective choice for your car upgrades

Interested in purchasing? Click HERE to know more!