If you look for Tesla wheel spacers, BONOSS is definitely the expert of Tesla wheel spacers, not because BONOSS only sells Tesla wheel spacers, but because Tesla users have a high recognition of BONOSS wheel spacers, compared to the generic type of wheel spacers or other wheel spacers, BONOSS insists on the independent design of Tesla full range of different data wheel spacers, we cover all models including Model 3, Model Y, and insists on measuring the actual use of the vehicle data, the accuracy of up to 0.02mm, to ensure Tesla wheel spacers are safe and high quality.
The Tesla Model Y uses PCD 5×114.3, CB64.1 hub-centric wheel spacers, which are bolt-on structured wheel spacers as the vehicle structure is fixed with nuts. 5 lug wheel spacers are safe to use on the Tesla Model Y. The full range of Tesla wheel spacers manufactured by BONOSS has several design details that add value compared to other brands of wheel spacers, including the patented Active Cooling feature, which will effectively help increase airflow through the Tesla brake kit and has a cooling function. This feature will effectively help increase the airflow at the Tesla brake kit and has a cooling function.
Tesla Model Y Forged 6061-T6 or 7075-T6 Aluminum Wheel Spacers
BONOSS uses only premium forged 6061-T6 or 7075-T6 billet aluminum materials for higher performance and safety. Forging gives wheel spacers higher strength, and denser structure and eliminates the possibility of air pockets in the material. 6061-T6 has a tensile strength of over 310 MPa, while 7075-T6 has a tensile strength of over 572 MPa. This means they have greater impact resistance, lower fatigue strength, and longer service life.
Tesla Model Y Grade 12.9 Wheel Studs
The matching wheel studs of BONOSS wheel spacers applied high-strength JIS SCM440 steel material. They have achieved ISO standard grade 12.9, tensile strength ≥ 1,220Mpa, limited life range test ≥ 2,000,000 stress cycles without damage, ultimate tensile load ≥ 152,000N, hardness (HV) ≥ 395, NSS ≥ 500H…The excellent performance of each item can ensure that wheel studs can withstand all kinds of bumps from the road and still work properly.
Tesla Model Y ISO 10 Grade Lug Nuts
The lug nuts are ISO Grade 10, with a guaranteed load of ≥ 1110 MPa and a hardness (HV) of ≥ 349, and each nut is protected by a Dacromet coating. Each BONOSS lug nut is “BONOSS engraved”, which means that these lug nuts are made by BONOSS factory, quality is guaranteed, customer interests are protected and BONOSS assumes responsibility for quality.
Tesla Model Y Full-cone Seat
Full-cone seat design provides a larger contact area, ensuring maximum friction and clamping force of the nut with the contact surface after installation. More force acreage and better fitting. Using the full-cone seat style of fastener for the wheel spacers installation work can not only bring a better installation experience but also more particularly guarantee.
Multi-stage Hubcentric Design
Based on traditional hub-centric wheel spacers, BONOSS has optimized this design to further reduce the chance of high-speed vibration, it is called a multi-stage hub-centric design. According to the actual test, the effect of BONOSS multi-stage hub-centric wheel spacers is far better than the common alternatives, which fit more perfectly, are safer, and are more stable.
Click on the image link below to purchase Tesla Model Y wheel spacers directly.
