The quality of Ford Mustang wheel spacers is the most important issue, no matter what parts you choose to modify, aftermarket parts need to be used in a safe situation, excluding the issue of whether they are installed correctly, the quality of Ford Mustang wheel spacers will determine whether it will work properly.
Why Ford Mustang Wheel Spacers Fail?
We often receive reports from customers that they have experienced safety problems with other brands of inferior wheel spacers, specifically cracks around the wheel studs of the wheel spacers, which clearly indicate that the material and processing of the wheel spacers do not meet the BONOSS standards. Normally installed Ford Mustang wheel spacers still show ring-like cracks around each bolt hole, which indicates that the material of Ford Mustang wheel spacers does not have sufficient tensile strength and yield strength, and also indicates that the manufacturer was irresponsible when producing Ford Mustang wheel spacers.
More serious cases may Ford Mustang wheel spacers appear to the center of the fracture surface, which indicates that Ford Mustang wheel spacers when subjected to uneven external forces, the material can not maintain good mechanical properties, there may occur in the cast Ford Mustang wheel spacers, because the cast material may appear in the pores, these pores lead to the uneven force of the material fracture.
BONOSS continues to improve the performance and design of Ford Mustang wheel spacers based on the analysis of various problems that occur with some inferior products on the market. The Active Cooling wheel spacers and Lightweight Plus wheel spacers have received positive feedback from customers all over the world, and customers have uploaded videos of themselves using and installing the BONOSS wheel spacers to Youtube. The Ford Mustang is now only available with Active Cooling wheel spacers for structural reasons, and as the most popular product from BONOSS, this product has been upgraded to address the above-mentioned issues to ensure the safety of customers.
Ford Mustang Wheel Spacers Safety
Active Cooling Ford Mustang wheel spacers use BONOSS’ proprietary patented cooling design, which allows air to circulate and cool the wheel spacers by means of air channels on the back of the wheel spacers, allowing the Ford Mustang wheel spacers to work properly at high temperatures and help dissipate heat from the parts.
Forged 6061-T6 or 7075-T6 aluminum, BONOSS uses only premium forged 6061-T6 or 7075-T6 billet aluminum for greater performance and safety. 6061-T6 has a tensile strength of over 310 MPa, while 7075-T6 has a tensile strength of over 572 MPa. The use of forging techniques can solve the problem of a high porosity that occurs with casting, and the dense internal structure means they have greater impact resistance, lower fatigue strength, and longer service life.
The above-mentioned Ford Mustang wheel spacers wheel studs break, BONOSS found that most of the wheel bolts on the market are only 10.9 grade, while BONOSS believes that 12.9-grade wheel bolts are better to ensure the safety of customers, and there are many dealers said 12.9-grade wheel bolts are better than the stock wheel bolts, maybe 12.9 grade is beyond the needs of many customers, but higher grade wheel bolts are necessary.
The matching wheel studs of BONOSS tires spacers applied high-strength JIS SCM440 steel material. They have achieved ISO standard grade 12.9, tensile strength ≥ 1,220Mpa, limited life range test ≥ 2,000,000 stress cycles without damage, ultimate tensile load ≥ 152,000N, hardness (HV) ≥ 395, NSS ≥ 500H…
