Wheel spacers are designed to create more clearance and backspacing for wheels. They have been widely used as an effective upgrade among many racing enthusiasts. Not only will they give your car a cool look, but they will also enhance the performance.

572 Mpa


503 Mpa




BONOSS Wheel Spacers Lug Nuts Wheel Bolts Icons (1)

High Precision

BONOSS Acura wheel spacers are accurate to 0.02mm which provides high quality and safety. In addition, a smooth installation experience.

BONOSS Wheel Spacers Lug Nuts Wheel Bolts Icons (5)

Safer & Better

Both forged Aviation 6061-T6 and 7075-T6 feature good hardness and toughness, excellent wear resistance characteristics.

BONOSS Wheel Spacers Lug Nuts Wheel Bolts Icons (4)

10 Years Warranty

BONOSS promises that if there is any quality problem with the Acura spacers within 10 years, we will provide warranty service.

With Acura hub-centric wheel spacers, you don’t have to spend a large budget on aftermarket wheels while improving the appearance of your vehicle. Their thicknesses vary from about 1/8″ all the way up to 2″ or more. If you intend to make your Mazda look sportier and more noticeable without changing wheels, then the thickness will be determined by the distance from the edge of the fender to the face of the tire. What size of spacers do I need?

Popular Models

Performance & Material

Forged Aircraft Aluminum

Aluminum Alloy Perfromance

BONOSS forged Acura wheel spacers are safer and stronger than those casting alternatives: Tensile Strength ≥ 310Mpa (AL6061-T6), Tensile Strength ≥ 572Mpa (AL7075-T6), Yield Strength ≥ 275Mpa (AL6061-T6), Yield Strength ≥ 503Mpa (AL7075-T6), and the Tensile Strength of the cheap alternatives is approximately 125Mpa below. This means our forged Aluminum Acura wheel spacers provide stronger impact resistance, less fatigue strength, longer service life range, and stronger corrosion resistance.

ISO Grade 12.9 Wheel Studs

Wheel Studs (SCM440)

The matching wheel studs of BONOSS Acura spacers applied high-strength JIS SCM440 steel material. Take the matching wheel studs as an example, they have achieved ISO standard grade 12.9, tensile strength ≥ 1,220Mpa, limited life range test ≥ 2,000,000 stress cycles without damage, ultimate tensile load ≥ 152,000N, hardness (HV) ≥ 395, NSS ≥ 500H… And the matching lug nuts have achieved ISO standard grade 10, proof load ≥ 1110Mpa, hardness (HV) ≥ 349


Over 66 SGS TÜV Certificated

SGS and TÜV are the world’s famous inspection, verification, testing, certifications. So far, BONOSS has achieved excellent scores in numerous SGS TÜV test items.

Contact Us

Customizing, questions, anything