Are you usually remove and install wheels all on your own? Then you may get frustrated with those factory wheel bolts. When mounting or dismounting wheels, the process can be troublesome, holding the wheel up with your legs, trying again and again to align the bolt holes, then cross-threading the bolts, meanwhile, balancing the weight of the wheel.
Good news is, the wheel stud conversion kit gives an easier and stronger fasten method than using the factory wheel bolts. For racing track events use, it is a much quicker method to swap wheels as well.
What is a wheel stud conversion kit?
BONOSS Forged Titanium Exposed Wheel Studs Conversion is a kind of special studs with both ends threaded. The short thread is mounted on the wheel hub according to the factory vehicle data and tightened with the required torque. On the other end, the wheel is fastened with lug nuts. It makes it possible to transform the European-made cars (such as BMW, Audi, Volkswagen) fasten form into Japanese cars (such as Honda, Toyota, Infiniti) form.
Benefits of Wheel Stud Conversion
- Wheel stud conversion offers an easy way to align the wheel when mounting. They make it more fluent to change wheels. It is a simple but high effective upgrade for your car.
- Wheel stud conversion allows for the safe use of different thickness wheel spacers. And the studs’ length is capable to adjust to get proper fasten.
- Wheel stud conversion allows for the flexible use of some beautiful lug nuts, which will perfectly enhance your car’s appearance as well as its practicality.
- Wheel stud conversion is compatible with both ball and conical seat lug nuts, which is suitable for most factory or aftermarket wheels.
Advantages of BONOSS Forged Titanium Exposed Wheel Stud Conversion:
Forged Process- Excellent Performance:
BONOSS Forged Titanium Exposed Wheel Stud Conversion undergoes tens of thousands of times heat cycles and continuous intense pressure to form. Its excellent performance is certified by the TÜV authority agency reports:
|TÜV Certification Report|
|Tensile Strength||1080MPa (Test Method: ISO 898)|
|Ultimate Tensile Load||138800N (Test Method: ISO 898)|
|Hardness(Vickers)||347 (Test Method: ISO 6507)|
|Proof Load||104000N (Test Method: ISO 898)|
For detailed test reports, please check TÜV Certification.
Titanium Alloy Material:
Titanium alloys possess high mechanical properties, not only have great fatigue strength and tensile strength performance but also maintain great strength at extreme temperatures up to 400 to 500°C. They are light in weight, also have extraordinary corrosion resistance-a thin oxide (TiO2, titania) layer spontaneously forms cover on the surface to protect them against corrosion. They have been used as various components, such as military applications, aircraft, spacecraft, medical devices, jewelry, expensive sports car parts and some premium sports equipment and consumer electronics.
BONOSS Forged Titanium Exposed Wheel Stud Conversion applies this material. Each stud conversion is processed Hard-Anodized/Polished surface treatment, smooth 100%, no scratches. Meanwhile, we retain the shiny primary color of titanium alloy, shining in the sun which makes your car more outstanding and attractive.
Accurate Data-Perfect Install Experience:
Derived from our 10+ years of practical measurement experience, BONOSS always grasp the first-hand data. Products designed with precise data not only offer a perfect install experience but also guarantee safety. BONOSS Forged Titanium Exposed Wheel Stud Conversion accuracy is maintained at 0.02mm, which is far ahead of other competitors.
Brand Logo, Promised Warranty:
Each stud conversion short thread end is printed with the logo of BONOSS, the long thread end is carved with our brand doll. This is not only our confidence in product quality but also our responsibility to customers. At the same time, it also provides customers with a way to find our after-sales service. Our products are promised warranty, which is an excellent and cost-effective choice for your car upgrades.