What is the Bolt Pattern on a Lexus IS Spacer?
The bolt pattern on a 1999-2025 Lexus IS spacer is 5x114.3mm or 5x4.5 inches. It is worth noting that the latest 2020-2025 Lexus IS uses wheel bolts instead
Save More Now! Get Up to 13% Off until 21st Mar with Coupon Code: aew13 |
By caid4315|2024-03-19T09:20:08+00:00March 19th, 2024|Blog|
The bolt pattern on a 1999-2025 Lexus IS spacer is 5x114.3mm or 5x4.5 inches. It is worth noting that the latest 2020-2025 Lexus IS uses wheel bolts instead
By caid4315|2024-03-19T09:06:51+00:00March 19th, 2024|Blog|
There are 10mm to 50mm aluminum alloy wheel spacers available for Lexus IS350 F-Sport RWD. For an OEM wheel setup, it is recommended to use 15-20mm spacers. Nowadays,
By caid4315|2024-03-18T01:31:50+00:00March 18th, 2024|Blog|
The thread size of the oil drain plug on a RAM1500 is M14x1.5mm. A common misconception is that as long as the oil drain plug has the same
By caid4315|2024-03-18T01:26:41+00:00March 18th, 2024|Blog|
The thread size of the oil drain plug on a Dodge Ram is M14x1.5mm. Using a magnetic oil drain plug is a common and safe practice for protecting
By caid4315|2024-03-17T02:27:58+00:00March 17th, 2024|Blog|
The thread size of the oil pan bolt for a Dodge Charger is M14x1.5mm. Uncontaminated motor oil is always best for your vehicle. In daily use, the continuous
By caid4315|2024-03-17T02:27:23+00:00March 17th, 2024|Blog|
The thread size of the oil drain plug on a Dodge Charger is M14x1.5mm. If you intend to change the OEM drain plug, then a magnetic oil drain
By caid4315|2024-03-16T01:40:09+00:00March 16th, 2024|Blog|
In some cases, the bolt pattern of a Dodge spacer is the same as Chevy. The only thing that might cause an issue is the center bore or
By caid4315|2024-03-16T01:38:56+00:00March 16th, 2024|Blog|
The size of the oil drain plug on a Dodge Challenger is thread size M14x1.5mm and head size 13mm. As a thumb of rule, there is not a
By caid4315|2024-03-15T01:54:05+00:00March 15th, 2024|Blog|
In the market, there are 1-inch up to 3-inch aluminum alloy rim spacers available for a Dodge Challenger SRT Hellcat. Proper-size Hellcat spacers provide a perfect flush stance
By caid4315|2024-03-15T01:49:50+00:00March 15th, 2024|Blog|
In some cases, the Chevy wheel spacers can fit a Dodge, especially if the bolt pattern, center bore, and offset are the same. However, it’s always best to
By caid4315|2024-03-14T01:21:17+00:00March 14th, 2024|Blog|
There are 1", 1.25", 1.5", 1.75", and 2" aluminum alloy wheel spacers available for Dodge Challenger 18-20″ rims. For an OEM wheel setup, a 10-20mm spacer is OK.
By caid4315|2024-03-14T01:20:21+00:00March 14th, 2024|Blog|
In some cases, yes, the Doge and Chevy lug nuts are the same. You can use Dodge lug nuts to fasten Chevy wheels, especially if the thread pitch,
By caid4315|2024-03-13T01:24:20+00:00March 13th, 2024|Blog|
The most common thread size of the lug nuts on a 2008-2025 Dodge Challenger SRT Hellcat is M14x1.5mm. A set of new wheel lug nuts is cost-effective insurance
By caid4315|2024-03-13T01:23:23+00:00March 13th, 2024|Blog|
The REFERENCE torque spec for a Dodge Challenger lug nut is 140-176 Nm. It is important to torque the wheel nuts properly, especially when replacing the wheels after
By caid4315|2024-03-12T01:15:28+00:00March 12th, 2024|Blog|
Genuine brand Dodge lug nuts are not easy to swell. Swollen lug nuts are caused by the rust and corrosion between the chrome decorative cap and the actual
By caid4315|2024-03-12T01:14:43+00:00March 12th, 2024|Blog|
A Dodge Challenger uses 20 pcs lug nuts to secure the wheels. The nut pattern is 5x115, so each wheel has 5 pcs lug nuts. Aftermarket wheel nuts
By caid4315|2024-03-11T01:37:47+00:00March 11th, 2024|Blog|
The most common socket sizes of Dodge Challenger SRT Hellcat wheel nuts are 22mm (13/16”). Swapping wheel nuts from stock to aftermarket is one of the most common
By caid4315|2024-03-11T01:35:38+00:00March 11th, 2024|Blog|
The most common sizes of Dodge lug nuts are M14x1.5mm/M12x1.5mm thread pitch, 13/16" hex, and standard size 60-degree conical seat. Aftermarket Dodge wheel nuts are various in styles,
By caid4315|2024-03-10T03:44:36+00:00March 10th, 2024|Blog|
The bolt pattern on a 2008-2025 Hellcat Challenger spacer is 5x115mm or 5x4.53 inches. For a 1970-1983 Challenger, the bolt pattern (PCD) is 4x114.3mm (JT) and 5x114.3mm (E-body).