BONOSS Forged Active Cooling Wheel Spacers

Professional, Performance, Safe

View More
Global-Pioneer-Active-Cooling-Technique-of-BONOSS-Wheel-Spacers(formerly-BLOXsport)

STRONG INNOVATION

Global Pioneer Active Cooling Technique

1. The cooling grooves are distributed in petals, and multiple heat dissipation grooves work at the same time, which effectively improves the cooling efficiency.
2. The aerodynamic arc-shaped design of the heat sink is conducive to the rapid flow of air and further improves the cooling efficiency.
3. The cooling groove uses an asymmetrical design, whether it is on the left wheel or the right wheel, forward or reverse, the purpose of heat dissipation can be achieved normally and effectively.
4. The cooling groove uses a sealed design to prevent rainwater and debris from entering the shaft head.
5. The front end of the heat sink is designed with an air trap groove, which can effectively increase the airflow and at the same time facilitate the disassembly of the wheel spacers.

Learn More

BETTER QUALTY

ISO Standard Grade 12.9 Studs & ISO Grade 10 Nuts

1. The matching bolt has passed the SGS Two million times Limited Life Range Test, and the test standard is ISO3800.
2. The matching bolts and nuts have fully passed the SGS TUV performance test ISO and SAE standards, including Tensile Test, Tensile Test for Full-Size Fastener, Proof Load Test, Hardness Test, Decarburization Test, Decarburization Test-hardness, Wedge Loading Test, Retempering Test.
3. The matching bolt and nut material passed the SGS TUV Chemical Composition Analysis Test.
4. The anti-rust performance of the matching bolts and nuts has passed the 192H neutral salt test, and the test standard is ISO9227.
5. The matching bolts pass TUV Microstructure, the standard is ASTM E3-11.

Learn More
High-quality Manufacturing for Wheel Spacers Safety BONOSS Hubcentric Wheel Spacers Wheel Adapters-cai
BONOSS-Forged-Active-Cooling-Wheel-Spacers-Safest-Material, Best-Performance

INDEPENDENT FACTORY

Top Material for Best Performance, Precision at 0.02mm

1. Made from High-Strength Aircraft Aluminum Alloy (6061-T6 or 7075T6), Lightweight, Forged.
2. Black Hard Anodized for durability and corrosion protection.
3. Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance.
4. The “knurling” design is used on the cylindrical surface of the wheel spacer, which can effectively increase the contact area with air and increase the cooling effect.
5. The PCD hole seat used to fix the wheel spacer is a full-cone seat design, which has better comprehensive performance and higher safety than the part-cone seat seat design.

Learn More

BROWSE BY MODEL

Enjoy A Better Driving Experience

Acura
Alfa Romeo
Aston Martin
Audi
Bentley
BMW
Buick
Cadillac
Chevrolet
Chrysler
Daihatsu
Citroen
Dacia
Daewoo
Daihatsu
Datsun
Dodge
DS
Ferrari
Fiat
Ford
GMC
Genesis
Holden
Hyundai
Honda
Hummer
Infiniti
Isuzu
Jaguar
Jeep
Kia
Lada
Lamborghini
Lancia
Land Rover
Lexus
Lincoln
Lotus
Lucid
Maserati
Maybach
Mazda
Mclaren
Mercedes-Benz
Mercury
MG
Mini
Mitsubishi
Mosler
Nissan
Opel
Peugeot
Pontiac
Porsche
Proton
Renault
Rolls Royce
Rover
Saab
Saturn
Scion
Samsung
Seat
Skoda
Smart
Ssangyong
Subaru
Suzuki
Tesla
Toyota
Vauxhall
Volkswagen
Volvo

MORE RELIABLE

Over 66 SGS TÜV Certificated

SGS and TÜV are the world’s famous inspection, verification, testing, certifications. So far, BONOSS has achieved excellent scores in numerous SGS TÜV test items.

Learn More
BONOSS-SGS-Certification
BONOSS-TUV-Certification

MORE EXAMPLES

100,000+ Successful Cases

Drive with 10+ wheel spacers manufacturing experience, having witnessed countless successful cases on tens of thousand cars, we have the confidence to say that as long as the spacers you buy are reputable and made of top quality material, wheel spacers will not cause any problems when installed correctly with care and patience.

View More
BONOSS Forged Active Cooling Hub Centric 2-inch Wheel Spacers for 5x114.3 Mitsubishi Lancer Evolution Widebody Kits (11)
BONOSS Forged Active Cooling Wheel Spacers 25mm for Honda Civic (FC1) (2)
BONOSS-Wheel-Spacers-Mercedes-Benz-C63-Widebody-Kits

MORE PROFESSIONAL

10 Years Warranty

BONOSS has been designing and manufacturing wheel spacers since 2007. Professional production experience and excellent product quality make us confident to provide a Super Long Warranty Service up to 10 years that far exceeds the period of most brands.

Learn More

GET TO US IF YOU HAVE ANY QUESTIONS