COOL+ YOUR WHEEL
THE BEST INFINITI WHEEL SPACERS
Wheel spacers are designed to create more clearance and backspacing for wheels. They have been widely used as an effective upgrade among many racing enthusiasts. Not only will they give your car a cool look, but they will also enhance the performance.
Avdvantages of Infiniti Wheel Spacers
Are Infiniti wheel spacers good or bad?
Fit Wider Tires
Using Infiniti wheel spacers allows you to safely fit wider tires on your existing wheels or upgrade to bigger wheels without rubbing against the frame, axle, or other suspension components. This, of course, improves traction and handling even more.
Fit Bigger Brakes
Performance brake kit is often bigger than the stock one. If you would like to upgrade to larger brakes, wheel spacers will make the required room for a larger caliper that wouldn’t fit in the factory wheel space. This will provide a significant driving experience increase.
Typically, widebody builds include new offset wheels and tires, because keeping the current wheels would make your car look like there’s a huge hole in the fender. Hence, if you have added a wide-body kit, wheel spacers will be your most effective solution.
Wheel spacers increase your track width. With the improvement of the traction, the resistance to rollover enhances, and the comfort level of handling the vehicle improves a lot. This is effective when the vehicle is driven in bad weather or when cornering the vehicle.
More Rim Options
Wheel adapters (conversion spacers) allow you to install aftermarket rims with different bolt patterns and hub diameters on the vehicle properly. By adding wheel adapters, you can build your own PCD conversion specification, such as 5 lug to 6 lug adapters.
Infiniti wheel spacers provide a cost-effective way to keep your current wheels while creating a much wider track plus a lower center of gravity. In return, you will experience more grip when cornering, which allows for a rapid acceleration as you exit curves.
Performance & Material
Forged Aircraft Aluminum
Aluminum Alloy Perfromance
BONOSS forged Infiniti wheel spacers are safer and stronger than those casting alternatives: Tensile Strength ≥ 310Mpa (AL6061-T6), Tensile Strength ≥ 572Mpa (AL7075-T6), Yield Strength ≥ 275Mpa (AL6061-T6), Yield Strength ≥ 503Mpa (AL7075-T6), and the Tensile Strength of the cheap alternatives is approximately 125Mpa below. This means our forged Aluminum Infiniti wheel spacers provide stronger impact resistance, less fatigue strength, longer service life range, and stronger corrosion resistance.
ISO Grade 12.9 Wheel Studs
Wheel Studs (SCM440)
The matching wheel studs of BONOSS Infiniti spacers applied high-strength JIS SCM440 steel material. Take the matching wheel studs as an example, they have achieved ISO standard grade 12.9, tensile strength ≥ 1,220Mpa, limited life range test ≥ 2,000,000 stress cycles without damage, ultimate tensile load ≥ 152,000N, hardness (HV) ≥ 395, NSS ≥ 500H… And the matching lug nuts have achieved ISO standard grade 10, proof load ≥ 1110Mpa, hardness (HV) ≥ 349…