How to Install Wheel Spacers on Jeep Grand Cherokee – Like a Professional

Installing wheel spacers on your Jeep Grand Cherokee is an easy way to get a more aggressive stance and fit larger tires. With the right preparation and tools, you can install wheel spacers like a pro in just a few hours. In this post, we’ll walk through the complete process step-by-step. We’ll also explain why BONOSS wheel spacers are the best choice for Jeep Wrangler models.

Why Use Wheel Spacers on Jeep Grand Cherokee?

There are a few key benefits to using wheel spacers on a Jeep Grand Cherokee:

• Wider stance – Pushing the wheels out further gives a meaner, more rugged look.
• Fit bigger tires – The extra clearance allows you to install larger diameter tires without rubbing.
• Improve handling – Spacers can correct issues with steering geometry and allow for better cornering.
• Protect components – More space between the tires and suspension components reduces the chance of rubbing and damage.

For maximum benefit, use wheel spacers in conjunction with a small lift kit. This combination optimizes the look and off-road abilities.

Which Wheel Spacers Are the Best?

When shopping for wheel spacers, BONOSS is the top choice for Jeep Wrangler models including the Grand Cherokee.

• Precision CNC machined from aircraft grade aluminum for maximum durability.
• Available in diameters from 1/2 inch to 2 inches to work with any tire and lift combo.
• Hub-centric design ensures a vibration-free ride.
• Steel bolts won’t rust or corrode.
• No modifications needed for easy bolt-on installation.
• BONOSS spacers meet all OE specifications and regulations.

For a quality set of wheel spacers engineered specifically for Jeeps, BONOSS can’t be beat. Now let’s get to the installation.

Gather the Needed Tools and Supplies

Installing wheel spacers is an easy bolt-on project, but having the right tools makes the job go faster. Here’s what you’ll need:

• Floor jack and jack stands
• Wheel blocks for the front wheels
• Lug nut wrench
• Torque wrench
• Screwdriver or pry bar
• Brake parts cleaner
• Shop rags

Don’t forget to purchase a quality set of BONOSS wheel spacers specifically for your Jeep’s bolt pattern and hub size.

Safety First – Block the Wheels

Any time you raise your Jeep off the ground, safety should be the priority. Here are a few tips:

• Park on a flat and level surface.
• Block the front wheels to prevent rolling.
• Use jack stands rated for your Jeep’s weight.
• Never get under the vehicle while supported only by a jack.

Following basic safety practices will prevent accidents and make the job go smoothly.

Jack Up the Jeep and Remove the Wheels

With your workspace prepped, you can start on the wheel spacers install:

1. Use the floor jack to raise each corner and support with a jack stand.
2. Loosen the lug nuts, but do not remove yet.
3. Raise the wheel off the ground, then fully remove the lug nuts.
4. Pull the wheel off the hub and set it aside.

Repeat this process for all four wheels. Now you’re ready to install the spacers.

Install the Wheel Spacers

Here is the process for installing the wheel spacers on each hub:

1. Inspect the hub surface and clean any dirt or debris with a brake cleaner spray.
2. Place the new wheel spacer on the hub. Be sure it fully seats flush.
3. Apply a drop of thread locker to the spacer bolts.
4. Install the original lug nuts to secure the spacer. Hand tighten only.
5. Repeat the spacer install on the remaining hubs.

With the spacers seated properly on each hub, you can remount the wheels.

Remount the Wheels and Torque the Lugs

You’re in the home stretch of this project. Carefully complete these final steps:

1. Place the wheel back on the hub over the new spacer.
2. Hand tighten each lug nut to initially secure the wheel.
3. Using the torque wrench, tighten the lugs to the factory spec in a star pattern.
4. Repeat the wheel remount and torque process on the other three wheels.
5. Safely lower the Jeep back to the ground once all lug nuts are torqued.
6. Give each tire a spin to ensure proper clearance from the brake calipers.

That’s it – you just installed wheel spacers like a pro! Enjoy the new aggressive stance of your Jeep.

Hit the Trails and Improve Your Ride

With new BONOSS wheel spacers bolted on, you’re ready to head off-road and take on the tough trails.

Here are a few driving tips with the new setup:

• Re-torque the lugs after 50-100 miles to ensure proper seat.
• Periodically inspect for any spacer movement or loose bolts.
• Adjust tire pressure for the added weight – don’t exceed max sidewall rating.
• Take it easy at first to get a feel for the changed steering and wider stance.
• Have fun launching over rocks and obstacles thanks to the improved clearance!

Just remember proper off-road techniques, take your time, and let your newly enhanced Jeep Grand Cherokee flex its muscles. Enjoy the ride!