Home/Blog/How 2-inch Wheel Spacers Before and After for Toyota Cars?
How 2-inch Wheel Spacers Before and After for Toyota Cars?
By caid4315|2022-12-15T02:55:31+00:00December 15th, 2022|Blog|
How do 2-inch wheel spacers before and after look like? Will 2023 Toyota wheel spacers make a difference? If you’re interested in buying new offset rims for off-road touring, you may have run across 2-inch wheel spacers. By spacing the wheels out about 50.8mm, 2-inch spacers solve rubbing problems easily and quickly. For Toyota cars, like the Toyota Tacoma / LC300 / LC200 / LC150, these rim spacers enlarge the section of aftermarket wheels.
Before installing 2-inch wheel spacers for your Toyota cars, it is important to check out the performance. The higher the strength, the safer the tire spacers are. There are two critical parameters you should figure out first – the tensile strength and the yield strength. The tensile strength of the 2-inch wheel spacers is the maximum amount of tensile stress that it can be subjected to before failure. So, if a wheel spacer has high tensile strength, it can resist a lot of tension without breaking.
Before Installing 2-inch Wheel Spacers for Toyota Cars
The benefits of the 2-inch wheel spacers set really speak for themselves. As long as you use quality spacers and installed them correctly, there will be no safety issues. Before installing 2-inch spacers, you may notice that the OEM wheels are set a bit inside the wheel arches. This is designed for slight tire size changing. However, your Toyota cars will look better and sportier if the wheels are pushed out to fill the inner fenders.
When removing the wheels, the vehicle hub exposes. It is essential to keep the vehicle hub clean before you put 2-inch wheel spacers on it. This is helpful in preventing wheel spacers from rusting or corrosion. Spray degreaser on the wheel hub, and use a brush to clean as much as the rust. Then wipe it down with the emery cloth. Make sure the contact surfaces are smooth. This needs to be done thoroughly. Any existing rust will cause the spacer to be installed not completely parallel to the hub. Done properly, you will enjoy all the advantages that 2-inch wheel spacers can provide.
After Installing 2-inch Wheel Spacers for Toyota Cars
These are the advantages that BONOSS 2-inch wheel spacers can provide:
BONOSS forged active cooling wheel spacers send air into the rotors to keep temperatures down. They come with functional cooling grooves which effectively dissipate heat. This is helpful to reduce thermal decay and improve road safety.
Hubcentric spacers offer a better system of support and stability. Based on traditional hubcentric 4×4 spacers, BONOSS has optimized this design to further reduce the chance of high-speed vibration, it is called a multi-stage hubcentric design. According to the actual test, BONOSS multi-stage hubcentric 2-inch wheel spacers are better, safer, and more stable.
BONOSS 2-inch wheel spacers are finished with a textured surface on the sides. Knurling patterns can enlarge the side area so that it can contact more air, boost the heat dissipation effect, and also reduce internal stress. That means improving the performance, strength, and durability of the spacers.
BONOSS off-road 2-inch wheel spacers have achieved tensile strength and yield strength up to 572 MPa and 503 MPa. They are made of high-grade forged 6061-T6 or 7075-T6 billet aluminum alloy. Not just the spacers themselves, but the lug studs are of the highest quality.
The provided wheel studs of BONOSS 2-inch wheel spacers applied high-strength JIS SCM440 steel material. They are ISO Standard Grade 12.9 approved (most OEM studs or bolts are grade 10.9). The tensile strength is up to 1,220 MPa, and the ultimate tensile load is up to 152,000 N. You don’t need to worry about the 2023 Toyota Tacoma wheel spacers becoming a weak point in the wheel combination due to corrosion and deterioration.