Will-2022-Tesla-Model-Y-Wheel-Adapters-Help-With-Rubbing

Since these 2022 Tesla Model Y wheel adapters are installed between the hub assembly and wheels, yes, they will make your wheels stick out a certain distance. How much distance the wheels stick out depends on the offsets. Offset refers to the distance in millimeters from the wheel’s centerline to the mounting plate of the wheel. You need to find out the offset of the stock rims. Then it’s pretty simple after that. Assuming it is a 45mm offset of your stock rim. And 1″ wheel adapters will make the wheel stick out 1″(25mm). Your wheel offset will change to 15mm (45 – 25 = 15). The thicker your adapter is, the more the wheel will stick out. Wheel adapters are components that change the wheel offset. If your wheels come with a high offset, then a set of 2022 Tesla model Y wheel adapters will correct the offset for you, making your wheel setup safer and better.

The Principle of 2022 Tesla Model Y Wheel Adapters

The 2022 Tesla Model Y wheel adapters allow you to fit various wheels without problems, even the wheels are not made for your vehicle. By using the rim adapters, you can build your own PCD conversion custom specification. They come with two sets of bolts. The adapter bolts directly to your hub and then the wheel is secured directly to your adapter. For instance, the 5×114.3 to 5×120 wheel adapters allow your 2022 Tesla Model Y to install 5×120 wheels. The 5×114.3 side is bolted to the vehicle hub, and the wheel is secured to the 5×120 side. They can also be used to change the center bore, which provides the same function as the conversion hub-centric rings.  You can custom the center diameter size, for example, 64.1mm to 73.1mm. These 2022 Tesla Model Y wheel adapters will transform your lug-centric wheels into hub-centric wheels. Both adapter and the wheel are held on with a safe stud engagement which prevents the wheels from falling off.

BONOSS-2022-Tesla-Model-Y-Wheel-Spacers-Bolt-on-Spacers

What Size 2022 Tesla Model Y Wheel Adapters Do I Need?

Technically speaking, the minimum required thickness is about 25mm (depending on the length of your studs). Since these 2022 Tesla Model Y wheel adapters will stick your wheels out to a certain distance, to avoid tire rubbing, it is better to do some measurements. Use a straight edge ruler to measure the distance from the inner fender lip and the outside edge of your wheel tires or rims. This distance is the perfect thickness to get the wheels flush with the fender and the maximum amount that wheels will not rub the wheel well. If the adapters push your wheels out too much, there will be some fender clearance problems. However, ticker 2022 Tesla Model Y wheel adapters can be made to account for your wheel offset. If your wheels stick in the fender a lot, then using a thicker adapter will push the wheels out further to get flush with the fender flares. This also provides a muscular and powerful look.

Browse 2022 Tesla Model Y Wheel Adapters here!
Contact us If You need Tech support!