Top-quality brand 2025 Lexus IS spacers won’t ruin bearings. As long as they fit properly and are correctly torqued, there will be no issues. Modern car manufacturers engineered the tolerances of the wheel bearings to handle more than the OEM load. The Lexus IS wheel spacers cause no more damage than offset wheels. Done properly, running genuine brand spacers will be fine for years without any problems.
In reality, even some famous aftermarket wheel manufacturers offer 2025 Lexus IS spacers to fit their wheels. Numerous aggressive-looking cars on the road are actually with wheel spacers on. They have been used for decades. Few bearing failures are caused by tire spacers. It isn’t a common problem. Get genuine 2025 Lexus IS wheel spacers and have them installed by professionals, then there is nothing to worry about.
What Are Best 2025 Lexus IS Spacers?
High-end Lexus IS wheel spacers are precisely engineered with exacting specifications to fit your vehicle. For example, BONOSS forged lightweight plus wheel spacers are up to 572 MPa (AL7075-T6 types). The tensile strength is the ability of a spacer to resist tearing due to tension. The higher the tensile strength, the more tensile stress that the wheel spacers can withstand before failure. Such BONOSS forged lightweight plus 2025 Lexus IS spacers are a good option for wheel upgrades.
Lighter wheel spacers are a good idea. These BONOSS forged lightweight plus Lexus IS wheel spacers are machined with “Hollow Carved” holes. This design provides a lightweight effect while maintaining high strength. For example, a normal Lexus 10mm spacer is 346g and a BONOSS hollow 10mm spacer is 251g. The weight is reduced by 113g (32.7% off). These light wheel spacers won’t badly affect the wheel bearing.
Is It Hard to Remove 2025 Lexus IS Spacers?
Removing Lexus IS spacers isn’t hard. It is optional to use Loctite on spacers. The threadlocker will glue the studs and nuts together. It makes the removal process hard. Normally, it is not necessary to use Loctite on BONOSS wheel spacers. Because BONOSS forged lightweight plus Lexus IS spacers come with disassembly grooves. The disassembly grooves refer to the small notches that are distributed on the corner of wheel spacers.
When removing these Lexus IS wheel spacers, get a flat-head screwdriver and place it on one notch. Pound a hammer on the screwdriver at a 45-degree angle. It should come off pretty easily. In addition, BONOSS forged lightweight plus 2025 Lexus IS spacers are finished with a textured surface on the sides. Knurling patterns can enlarge the side area so that it can reduce internal stress. It is worry-free to use these BONOSS forged lightweight plus Lexus IS spacers.
