Yes, high-quality Honda Accord 1-inch spacers provide a cooler look and better performance. It is the most cost-effective and easiest way to widen your car without damaging the ride quality. By moving the tires out a few millimeters, they make the vehicle look sporty and muscular. You can achieve such a purpose without replacing the wheels. While a good look is important, many car enthusiasts care more about practical use.
If you add a 1-inch wheel spacer on each tire, then the track width will increase by about 50mm. This is a big improvement for your ride. For example, the wheels sit further away which provides better stability and rollover resistance. In addition, Honda Accord wheel spacers add more inner wheel clearance. As a rule of thumb, a 1-inch spacer is approximate -25mm offset. The less the offset, the more the wheels will stick out from the wheel hub. This allows you to install bigger tires and larger brakes safely and nicely.
Are Aluminum Honda Accord 1-inch Spacers Good?
As much as the wheels, forged aluminum Honda Accord wheel spacers are better and safer than the cast ones. BONOSS forged active cooling aluminum wheel spacers are manufactured from a solid piece of billets. They have undergone continuous intense pressure to be formed. Due to the continuous stress cycle and process of deformation, these BONOSS forged active cooling Accord 1-inch spacers become hard and tough. The strength is greatly enhanced.
BONOSS forged active cooling Accord 1-inch spacers are made of forged 6061-T6 or 7075-T6 billet aluminum alloy. The tensile strength is up to 572 MPa and the yield strength is up to 503 MPa (AL7075-T6). The higher the strength, the better the performance. What’s better, BONOSS active cooling wheel spacers come with heat dissipation grooves to make brake cooling better. The heat dissipation grooves behind the spacers boost the cooling efficiency, reducing brake thermal decay, and improving road safety.
How to Choose the Best Honda Accord 1-inch Spacers Brand?
As a professional Honda Accord 1-inch spacers designer and manufacturer, BONOSS only uses the highest quality materials. Wheel lugs apply a clamping force to secure the spacer and wheel to the vehicle hub, Particularly, BONOSS forged active cooling Honda Accord 1-inch wheel spacers provide ISO grade 12.9 wheel studs (most stock vehicle studs are grade 10.9) and ISO grade 10 lug nuts. They are strong and durable, enough to deal with daily driving, even racing events and other scenes.
To ensure a stable and firm wheel connection, BONOSS forged active cooling Accord 1-inch spacers come with full-cone lug seats. Full-cone seat design provides a larger contact area, more force acreage, and better fitting. This allows the studs and nuts to apply enough clamping force to lock the BONOSS forged active cooling Honda wheel spacers, avoiding any potential loosening risks. In that case, the axle-spacer-wheel connection can be fastened firmly, meaning no vibration, fewer stress loads, higher safety, and a longer service life range.
