Yes, it is OK to use 2024 Audi A4 wheel spacers. Spacer have zero effect on the Quattro all-wheel drive system. They are designed to push the wheels and tires out. There are many benefits when upgrading with A4 wheel spacers. These metal components increase the track width. A wider track not only adds more stability but also makes your car look cooler. By pushing the wheels and tires outwards, the wheel spacers prevent tires from rubbing against the suspension components or fenders.
Mostly, installing 2024 Audi A4 wheel spacers doesn’t affect tire balance or alignment. If the tire balance was fine before, it will be fine after installing wheel spacers. Adding spacers is similar to changing to lower-offset rims. If you use quality ones and install them correctly, wheel spacers themselves don’t cause any problems. Nowadays, the Audi A4 B10 spacers are one of the most cost-effective wheel upgrading components which surely boosts the car’s appearance and performance.
Do I Need 2024 Audi A4 Wheel Spacers for All 4 Tires?
It is optional to install 2024 Audi A4 wheel spacers for all 4 tires. Most people use wheel spacers to accommodate bigger brakes and wider tires. Therefore, you can have wheel spacers installed on the front or rear only. Based on traditional rim spacers, BONOSS forged active cooling wheel spacers come with more useful designs, for example, the active cooling technique. They are designed with heat dissipation grooves to make brake cooling better. Such petal-shaped grooves allow the external cold air to flow continuously inside the wheel spacer when it rotates.
The air takes away the heat, so these BONOSS forged active cooling 2024 Audi A4 wheel spacers actively dissipate heat for the braking system. There are small notches that are distributed on the corner of BONOSS forged active cooling A4 B10 spacers. These notches act as air collectors which tremendously enlarges the airflow, enhancing the heat dissipation effect, and improving road safety. When it comes to the brake system, apart from braking capacity, heat dissipation is another important aspect. In short, BONOSS forged active cooling aluminum alloy rim spacers are good for your performance brakes.
Do 2024 Audi A4 Wheel Spacers Cause Bearing Failure?
Proper-size 2024 Audi A4 wheel spacers won’t affect the bearings. Wheel spacers are no different than rims with a more negative offset. Since the Audi B10 spacers are bolted onto the vehicle wheel hubs, many people worry that spacers may break bearings. Actually, no, the load from the wheel is transferred to the axle/hub through the friction of the clamped joint, not through the wheel bolts. In other words, if you properly torque genuine brand wheel spacers, there will be no problems.
What’s better, BONOSS provides ISO grade 12.9 wheel bolts to ensure a strong wheel-spacer-hub connection. The provided wheel studs of BONOSS forged active cooling 2024 Audi A4 wheel spacers are made of high-strength forged SCM440 alloy steel. They have achieved ISO standard grade 12.9, tensile strength≥ 1,220 MPa, ultimate tensile load ≥ 152,000 N, and hardness (HV) ≥ 395. With such high-strength hardware, these BONOSS forged active cooling 2024 Audi A4 wheel spacers can bear more force without breaking.
