What is the Bolt Pattern for A Hyundai Santa Fe Spacer?
By caid4315|2024-01-20T08:20:16+00:00January 20th, 2024|Blog|
The bolt pattern for a 2000-2024 Hyundai Santa Fe spacer is 5×114.3mm (5×4.5”). Normally, Wheel spacers will create more inner wheel clearance to solve rubbing issues. This is particularly important for those who need that extra space to clear big-size rims and board tires. Because now your tires are further away, there is less chance they will hit the fenders when operating a U-turn. Proper Hyundai Santa Fe spacers can bring the wheels and tires to flush with the fenders, which greatly improves the appearance of your vehicle.
For performance upgrades, it is often possible to buy aftermarket suspension components (springs, shock absorbers, sway bars) that improve handling. Adding Hyundai Santa Fe spacers means more inner wheel clearance. This is effective to accommodate bigger suspension parts. In other words, a Hyundai Santa Fe spacer creates more clearance to avoid potential tire rubbing. Many people seek better handling. Indeed, a good set of Santa Fe wheel spacers bring wheel performance to a higher level.
Do Hyundai Santa Fe Spacers Affect Aerodynamics?
If you keep the tires still covered by the fenders, the Hyundai Santa Fe spacers hardly affect aerodynamics. For many enthusiasts, Hyundai Santa Fe spacers are very useful in the process of completing a wide-body build. Basically, if you added wider fenders, you would need new offset wheels to fit. There are various thicknesses of Hyundai Santa Fe spacers in the BONOSS store. They undergo continuous tons of pressure to form. The resulting wheel spacers have a high degree of uniformity in the grain structure.
Apart from the base functions of spacers, BONOSS forged active cooling Hyundai Santa Fe wheel spacers provide more practical features. For example, the active cooling function. Distributed in petal shape, these heat dissipation grooves allow the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat, so it achieves the purpose of actively dissipating heat for the braking system. These BONOSS forged active cooling Hyundai Santa Fe wheel spacers are helpful to make brake cooling better.
Are Hyundai Santa Fe Spacers Easy to Install?
Installing Hyundai Santa Fe spacers is pretty easy. After much study about fitment and measurement between thickness and material, you’ve finally selected a new set of Hyundai Santa Fe spacers for your ride. Now all you have to do is put them on your vehicle. The installation process normally can be finished within an hour. In the process, you have to remove the entire wheels to get the new Hyundai Santa Fe spacers installed, then tighten them up, and you’re ready to roll.
People worry about if the spacers are hard to remove. In fact, removing Hyundai Santa Fe spacers isn’t hard. To make the removal process easier, BONOSS forged active cooling Hyundai Santa Fe spacers come with disassembly grooves. When removing BONOSS forged active cooling Hyundai Santa Fe spacers, get a flat-head screwdriver and place it on one notch. Pound a hammer to the screwdriver at a 45-degree angle and they should come off pretty easily.