Late last month, this BMW 5 Series F10 installed BONOSS Forged Titanium Exposed Wheel Stud Conversion Kit, which designed specifically to fit this vehicle and showcase an outstanding look with modern fashion. It is a perfect match for these dark black forged wheels and shiny Titanium primary color studs, shiny and eye-catching.

Furthermore, the owner of this BMW F10 is willing to fit the car with new aftermarket wheels, together with wheel spacers (still on the delivery way), adding more aggressive looks. Indeed, the length of the stud conversion can be adjusted flexibly, which makes it possible to install different offset aftermarket wheels as well as wheel spacers safely.

Besides, converting your vehicle to wheel studs and lug nuts is a simple but highly effective work that can be completed in a few hours. Stud conversion offers an easier wheel mounting method, no more holding wheels a long time to align the bolts holes repeatedly, no more threading wheel hangers in and out which can be troublesome, no more worrying about scratching the brake calipers.

BONOSS Titanium Wheel Conversion on BMW 5 Series F10

BONOSS Titanium Wheel Conversion on BMW 5 Series F10

The F10-generation 5 Series may be one of the best BMW’s models, which has been praised for its great looks, beautiful built interior, superb technology and superior ride quality. When talking about its appearance, cannot find any ways to belittle it, the current BMW 5 Series F10 is a handsome car (especially after proper tuning). Every turning, every speed up, every control is smooth and elegant. Nothing feels impractical. Even the seats and pedals are excellent. And such an incredible car equipped with the best modification studs-BONOSS Forged Titanium Exposed Wheel Stud Conversion.

BONOSS Forged Titanium Exposed Wheel Stud Conversion applies Titanium alloy materials, which possess high mechanical properties, not only have great fatigue strength and tensile strength performance but also maintain great strength at extreme temperatures up to 400 to 500°C. They are light in weight, also have extraordinary corrosion resistance. Each stud conversion is processed Hard-Anodized/Polished surface treatment, smooth 100%, no scratches. BONOSS insists on actual measurement. Thus, we have also actually measured the BMW 5 Series F10 data. Products designed with precise data not only offer a perfect install experience but also guarantee safety.

BONOSS Forged Titanium Exposed Wheel Stud Conversion

If you are the owner of a BMW 5 Series F10 and would like a wheel stud conversion kit modification. Here are installing steps that may help you:

Step 1
Park the car in a safe, well lit, level area, leave the wheels in contact with the ground. Assembly the torque wrench and a 17mm Socket to loosen but not remove the lug bolts before raising the vehicle.

Step 2
Raise and support the vehicle with a jack or by crane. Holding the wheel to remove the bolts to prevent a sudden drop of the wheel. And then remove the wheel slowly.

Step 3
Thread the short side in the wheel hub, and then tighten it with a 6mm inner Hex Ratchet. The torque should be 20 N.m.

Step 4
Align and mount the wheel, then use a torque wrench with a 19mm extended socket to thread the lug nuts in and then fasten. Repeat step three & four on the remaining wheels.

BONOSS Titanium Wheel Stud Conversion F10 Install Steps (5)

Step 5
Land the vehicle, use the torque wrench and 19mm extended socket for the second fasten. The torque should be 140-150N.m.

Step 6
Your Wheel Stud Conversion Kit installation is now complete!

Safety Information:

  • BONOSS wheel stud conversion kit is compatible with both ball and conical seat lug nuts, which is suitable for most factory or aftermarket wheels. Thus, it is needed to choose suitable lug nuts according to the seat type of your wheels to ensure safe fastening. This BMW 5 Series F10 uses conical seat lug nuts.
  • The studs’ thread length is capable to adjust. If you would like to install wheel spacers, please ensure the length of the studs is enough for threading tightly. And, if you don’t know the proper length, you are welcomed to contact our tech stuff freely.
  •  Each stud conversion short thread end is printed with the logo of BONOSS, the long thread end is carved with our brand doll. This offers an easy method to distinguish other fake and inferior products. At the same time, it also provides a way to find our after-sales service. Our products are promised warranty, which is an excellent and cost-effective choice for your car upgrades

Interested in purchasing? Click HERE to know more!