The Subaru Exiga wheel spacers just push your wheels out a few millimeters. This won’t disrupt the airflow, hence there will be a negligible effect on fuel consumption. People think that wheel spacers affect fuel consumption because of the added weight. With the development of modern manufacturing technology, high-end Subaru Exiga wheel spacers are made as light as possible. The added weight is really insignificant. In other words, if you just add Subaru Exiga wheel spacers, there should be no difference before and after.
With high-quality Subaru Exiga wheel spacers, you will get more stability and better handling. As the tires are more evenly loaded, you will experience a faster acceleration response when coming out of a corner. Despite this, never choose cheap-casting Subaru Exiga wheel spacers. They are components that contact the wheel and vehicle hub directly, so strength is extremely important. Buying from reputable suppliers will be much safer.
Why Forged Subaru Exiga Wheel Spacers Are Better?
The main manufacturing processes of Subaru Exiga wheel spacers are forging and casting. Metals have a grain, and when they are cast into a mold, the misalignment of the molecules disrupts the natural structure, compromising strength. That is why casting wheel spacers are not safe. However, by subjecting the material to tremendous stresses, the forging process eliminates internal voids, thereby providing better structural integrity. In simple words, forged Subaru Exiga wheel spacers are far safer and more reliable than casting alternatives.
BONOSS forged aluminum Subaru Exiga wheel spacers are designed for performance improvement. Due to the advanced forging process, these aluminum spacers have a very high weight-to-strength ratio. As a result, they are much strong with much less weight. Lighter Subaru Exiga wheel spacers will perform better in most conditions. Adding such lightweight components wouldn’t noticeably affect the gas mileage.
Are Aluminum Subaru Exiga Wheel Spacers Strong Enough?
Wheel spacers have existed for decades. For hundreds of years, spacer manufacturers have produced many variants with significantly different properties. When you intend to get some Subaru Exiga wheel spacers, you may have to balance the options of steel, aluminum, and titanium. Steel Subaru Exiga wheel spacers get a bad rap because they’re typically the heaviest of the bunch and they don’t tend to be quite as rustproof as the others.
BONOSS Subaru Exiga wheel spacers are all made by a super forging process. They undergo a series of safety tests before leaving the factory. The tensile strength is up to 572 MPa and the yield strength is up to 503 MPa (AL7075-T6). High tensile strength gives it strong resistance to being pulled apart, making it resistant to bending and breaking. At the same price as many other spacers, BONOSS Subaru Exiga wheel spacers provide more practical features such as active cooling, multistage hub-centric, and more.
