Whether you would like to enhance the performance and appearance of your Hummer EV without paying a big fortune to do it, look no further than BONOSS wheel adapters for trucks. A set of Hummer EV wheel adapters allow you to get that custom mod wheel look at an affordable price. They are designed to change bolt patterns, center bore diameters, and correct wheel offset in order to properly install your aftermarket wheels. Your Hummer EV becomes more stable as the wheel adapter provides additional width for the wheel track. In this way, the weight of the vehicle is distributed on all the wheels equally which in turn improves the comfort of handling. Aesthetically speaking, the Hummer EV that installs the wheel adapters get an aggressive and manly look due to the pushing outside of the wheels. The appearance gets a boost with the wheels flush with the fender line. This pushing out of the wheels also offers better off-roading performance for your Hummer EV.

How to Install GMC Hummer EV Wheel Adapters?

A Hummer EV wheel adapter helps you convert bolt patterns, eliminate tire rub and make up for different wheel offsets. The adapters are built with pre-installed wheel studs and come with a set of mounting nuts and a hub-centric lip to make sure the adapters remain in place long term. If you are ready to install wheel adapters, the instructions below may help you walk through each step. Usually, the hub side of the adapter will be attached with the factory studs and fasten with the provides lug nuts, while the side that facing the wheel will have pre-installed lug studs on it in the bolt pattern of the wheel.


  1. Park your Hummer EV in a safe, well-lit, level area, leave the wheels in contact with the ground;
  2. Loosen all the lug nuts, lift the truck and slowly remove the stock wheel;
  3. Cleaning the entire hub surface, ensuring it is clean and smooth;
  4. Place your Hummer EV adapters on the hub and ensure that the adapter is firmly seated and flush against the hub;
  5. Tighten the adapter with the matching lug nuts to the vehicle hub to specific torque;
  6. Installing your wheel, use the stock lug nuts to secure it;
  7. Repeat the above steps for the remaining wheels;
  8. Then your new wheels are safely installed on your Hummer EV.

Who Sells Hummer EV Wheel Adapters Near Me?

BONOSS offers a huge range of wheel adapters to fit your Hummer EV. Your custom wheel adapters will be designed by our independent design department and manufactured in the independent factory, of top-grade forged 6061-T6 or 7075-T6 aluminum and installation is a breeze. They are fully over 66 SGS, TUV ISO standard test reports certificate, which ensures safety. You can get them in either lug-centric or hub-centric varieties.  If you’re looking for an unusual thickness or need to fit custom wheels that won’t work with standard wheel spacers, look no further than BONOSS custom-made wheel adapters. BONOSS offers non-normal thickness’s customized service, completed only in 1-3 days, 3mm-160mm thick, 130mm-350mm dimension is available, OEM/ODM is available. Common requests from our customers include PCD conversion, CB conversion adapters for aftermarket wheels (e.g., 8×165.1 to 6×139.7 wheel adapters, 8×6.5 to 8×180 adapters, 8 lug to 6 lug adapter). And, if you meet any problem with the selection, we have a support team that consists of professionals ready to help.