Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.5mm and M12x1.5mm. A M14 means the width of the thread area and a 1.5mm means the thread pitch. It is usually measured in millimeters. If you plan to replace the stock lug nuts, it is important to figure out what sizes of wheel nuts fit your vehicle. You can find the thread size in the owner’s manual. The next step is to figure out the seat types.
The seating type refers to the part of the nut that makes contact with the wheel lug seat. Since aftermarket wheels come with various lug seat types, you may need new aftermarket lug nuts to fit new wheels. Simply put, the better the material it is, the stronger a wheel nut is. By far, the steel Ford wheel nuts are one of the strongest lug nuts. High-quality Ford tire nuts ensure a stable wheel connection.
What Brand Makes the Best Ford Lug Nuts?
Brand-new Ford lug nuts are exactly safe to use. For those who intend to improve the performance and appearance of their pickup trucks with a small budget, BONOSS forged ISO grade 12 50BV30 steel lug nuts will be a good idea. Forged wheel lug nuts are oftentimes stronger and more durable than universal ones. The super forging process maximizes the strength which makes them highly resistant to wear and damage. This means these BONOSS forged 50BV30 steel Ford lug nuts are not easy to break off.
In addition, BONOSS forged ISO grade 12 lug nuts will undergo a series of safety tests before leaving the factory such as impact resistance, tensile strength, and hardness. The minimum proof load is over 105,700N. Due to actual measurement and vehicle-specific design, each BONOSS wheel lug nut is made according to your vehicle’s specifications. After special surface treatment, these BONOSS forged 50BV30 lug nuts give neutral salt spray resistances exceeding 500 hours. Such truck wheel lug nuts can remain in good condition over time.