If you have more than a 25mm wheel gap, quality 1-inch Toyota Highlander spacers are exactly safe to use. Decades of research and millions of dollars have gone into the advancement and development of wheel spacers. They have drastically improved over the years and become safer and more reliable. Most reputable companies have carefully measured the vehicle hub and stud length when designing these 1-inch Toyota Highlander spacers, ensuring a proper fitment meanwhile increasing the safety of the vehicle occupants.
1-inch Toyota Highlander spacers are vital for adding big suspension parts. Installing wheel spacers can be one of the first upgrades you make to adopt bigger aftermarket wheels. Due to performance brakes being usually larger than the OEM ones, more inner wheel clearance will be needed to avoid any rubbing issues. The 1-inch Toyota Highlander spacers provide you with an excellent solution to mount aftermarket accessories correctly and safely. This gives you added confidence to 4×4 off-roading events as well as improved driving quality.
What 1-inch Toyota Highlander Spacers Are the Safest for SUVs?
Speaking of the safest 1-inch Toyota Highlander spacers, tensile strength is very important. It is the ability of a spacer to resist tearing due to tension. The higher the tensile strength, the more tensile stress that the wheel spacers can withstand before failure. When tensile strength is effectively increased, total toughness is growth. High tensile strength gives it strong resistance to being pulled apart, making it resistant to bending and breaking. Therefore, 1-inch Toyota Highlander spacers with higher tensile strength are safer and better.
Simply put, when facing bump and impact loads, higher tensile strength can bear greater forces without breaking. BONOSS forged 1-inch Toyota Highlander spacers perform better: the tensile strength is up to 572 MPa, and yield strength is up to 503 MPa (AL7075-T6). Unfortunately, the tensile strength of the cheap casting alternatives is approximately 125 MPa below. Quality is always a huge deal when it comes to the components you add to your car. Getting a set of quality 1-inch Toyota Highlander spacers ensures safety all along.
Are BONOSS 1-inch Toyota Highlander Spacers Trustable?
Brand manufacturers focus on quality and performance. Before leaving the factory, our tech staff will do a series of inspections on the finished 1-inch Toyota Highlander spacers to check for any defects. They measure the individual aspects of the spacers to make sure that they meet the design specification. Besides, BONOSS takes these 1-inch Toyota Highlander spacers to safety tests, like tensile strength, proof load, yield strength, hardness, and so on.
In order to distinguish the real BONOSS 1-inch Toyota Highlander spacers and protect customers’ interests, BONOSS has built a complete authentication system. When you get BONOSS wheel spacers, check the authentication code on the package. Then compare these numbers with BONOSS official stores’ databases. If they don’t match, they are not genuine BONOSS products. Therefore, if you get such 1-inch Toyota Highlander spacers, the best way is to return these spacers and purchase from a genuine BONOSS dealer.