The Subaru Lucra wheel spacers are used to fix the wrong clearance issues. They are widely and successfully applied for decades. As long as you use genuine quality sets and install them correctly, they are essentially safe and reliable. Since wheel connection is an important element for a car, these Subaru Lucra wheel spacers will improve safety by correcting the wrong offset, clearing big brake caliper rubbing issues, adding more stability, and boosting the roller resistance.
Many people claim that Subaru Lucra wheel spacers are dangerous because they will be broken when facing fierce impacts. However, as the spacer industry develops, the strength of the spacer has been greatly improved. For example, a forged BONOSS 7075-T6 spacer can withstand about 572 MPa stress without breaking. And BONOSS spacer wheel studs can bear a massive load of up to 1,220 MPa. With such strength and toughness, modern Subaru Lucra wheel spacers are just as safe as many aftermarket alloy wheels.
Will the Subaru Lucra Wheel Spacers Rust?
Quality Subaru Lucra wheel spacers won’t rust so easily. Aluminum spacers are a popular choice for automobiles not only because they’re lightweight but also because they resist corrosion. When aluminum is exposed to water it creates a film of aluminum oxide over the metal that protects the metal beneath it from corrosion. To protect Subaru Lucra wheel spacers from corrosion-related failure, manufacturing companies often treat their spacers during production.
BONOSS Aluminum Subaru Lucra wheel spacers are hard-anodizing to resist corrosion so that they can work well for a long time without any problems. A proper hard anodizing coating ensures complete protection against corrosion. The oxide layer that follows the anodizing process offers excellent protection. The black dye not only brings a premium appearance but also tends to be lightfast. This means that the coatings will not fade easily. BONOSS Subaru Lucra wheel spacers will serve you in the long run.
Will the Subaru Lucra Wheel Spacers Crack?
Decades of optimization and countless cases have proven that as long as you install them properly, quality Subaru Lucra wheel spacers won’t crack. If you use spacers, make sure the wheel studs are strong enough to keep everything in place safely. A stronger retention power on the wheel is necessary. Arguably, the higher the tensile strength, the more force that the wheel studs can withstand without cracking.
All BONOSS Subaru Lucra wheel spacers come with ISO Grade 12.9 wheel studs and ISO Grade 10 lug nuts. They are all approved by SGS and TÜV. To ensure safety, BONOSS Subaru Lucra wheel spacers will undergo a series of safety tests before leaving the factory. The performance of those wheel studs is great: tensile strength ≥ 1,220 MPa; ultimate tensile load ≥ 152,000 N; proof load ≥ 121,000 N. These SGS TÜV-certified wheel lug studs are completely safe to use.
