# BONOSS Wheel Spacer Example: 2019 Honda Odyssey

This time, BONOSS wheel spacer engineers got to test out the 2019 Honda Odyssey. Here are the wheel spacer sizes of this car:

– **Model**: 2019 Honda Odyssey
– **Special note**: OEM wheel setup
– **Wheel spacer size**: front 20mm / rear 25mm
– **Bolt pattern (PCD)**: 5×114.3mm
– **Center bore (CB)**: 64.1mm
– **Lug nut size**: M12x1.5mm

If you are an owner of the 2019 Honda Odyssey and planning to buy the best forged wheel spacers, don’t hesitate. BONOSS company has got you covered.

With over 18 years of manufacturing experience and 1800+ drawing updates, BONOSS provides the best wheel spacers. There are several key advantages that make their spacers a top choice.

## 1. Active Cooling for Better Driving

**BONOSS forged active cooling wheel spacers come with heat dissipation grooves. The heat dissipation grooves allow the external cold air to flow continuously inside the wheel spacer. The air takes away the heat, actively dissipating heat for the braking system. If you pursue better performance, then BONOSS forged active cooling wheel spacers are well worth the investment.

## 2. Knurling Surface for Better Experience

**BONOSS forged active cooling wheel spacers are finished with a textured surface on the sides. The knurling surfaces eliminate internal stress, which contributes to more reliable product mechanical properties. The crisscross knurling pattern enlarges the cooling area, which is good for the active cooling effect.

## 3. Strong Fasteners for Enhanced Stability

**To ensure safety, BONOSS provides ISO grade 12.9 wheel studs. These wheel studs will undergo a series of safety tests before leaving the factory. The results of those performance tests are great: tensile strength≥1,220 MPa, proof load≥121,000 N. They are all approved by over 75 SGS and TÜV authoritative certification reports.

# Frequently Asked FAQ

**Q: Will wheel spacers stop rubbing?**
A: By moving the wheels out, wheel spacers are helpful to keep wider tires from rubbing and clear brake caliper interference.

**Q: Do you have to cut studs for wheel spacers?**
A: As long as the wheel pockets are deep enough, you don’t need to cut OEM wheel studs for wheel spacers.

**Q: Do I need wheel spacers on all 4 tires?**
A: If you want to keep the same wheel offset, you can install wheel spacers on all 4 tires.

**Q: Do wheel spacers ruin alignment?**
A: If you just install spacers, adding wheel spacers doesn’t ruin alignment.

**Q: Do wheel spacers rust?**
A: Quality brand (like BONOSS) aluminum wheel spacers won’t rust even after a long time.

(Hi, I’m Kevin Brian, an experienced mechanical engineer. All articles, images, and videos are human-produced to ensure the best user experience. They are not generated by Artificial Intelligence (AI) Models or tools.)