If your Lexus car comes with OEM locking wheel lug nuts, then a special key may be stored in the glove compartment, center console storage, storage box, or

The lug wrench size for a Lexus lug nut is about 21mm (13/16″). Wheel nuts are critical components to keep the wheels and tires secured. They have a

The bolt pattern of a Lexus spacer can be 5x114.3mm (IS/ GS/ ES/ LM/ NX/ RC/ RX/ RZ/ UX) or 5x120mm (LC/ LS/ TX/ LM). Several factors determine

No, the bolt pattern of a Lexus spacer is NOT the same as Dodge. For example, the Lexus IS uses a 5x114.3mm bolt pattern while the Dodge Challenger

The most common lug pattern of a 2008 Lexus IS250 spacer is 5x114.3mm. Wheel spacers create more space between tires to accommodate more modification parts. Whether you are

The bolt pattern on a 1999-2025 Lexus IS spacer is 5x114.3mm or 5x4.5 inches. It is worth noting that the latest 2020-2025 Lexus IS uses wheel bolts instead

There are 10mm to 50mm aluminum alloy wheel spacers available for Lexus IS350 F-Sport RWD. For an OEM wheel setup, it is recommended to use 15-20mm spacers. Nowadays,

The thread size of the oil drain plug on a RAM1500 is M14x1.5mm. A common misconception is that as long as the oil drain plug has the same

The thread size of the oil drain plug on a Dodge Ram is M14x1.5mm. Using a magnetic oil drain plug is a common and safe practice for protecting

The thread size of the oil pan bolt for a Dodge Charger is M14x1.5mm. Uncontaminated motor oil is always best for your vehicle. In daily use, the continuous

The thread size of the oil drain plug on a Dodge Charger is M14x1.5mm. If you intend to change the OEM drain plug, then a magnetic oil drain

In some cases, the bolt pattern of a Dodge spacer is the same as Chevy. The only thing that might cause an issue is the center bore or

The size of the oil drain plug on a Dodge Challenger is thread size M14x1.5mm and head size 13mm. As a thumb of rule, there is not a

In the market, there are 1-inch up to 3-inch aluminum alloy rim spacers available for a Dodge Challenger SRT Hellcat. Proper-size Hellcat spacers provide a perfect flush stance

In some cases, the Chevy wheel spacers can fit a Dodge, especially if the bolt pattern, center bore, and offset are the same. However, it’s always best to

There are 1", 1.25", 1.5", 1.75", and 2" aluminum alloy wheel spacers available for Dodge Challenger 18-20″ rims. For an OEM wheel setup, a 10-20mm spacer is OK.

In some cases, yes, the Doge and Chevy lug nuts are the same. You can use Dodge lug nuts to fasten Chevy wheels, especially if the thread pitch,

The most common thread size of the lug nuts on a 2008-2025 Dodge Challenger SRT Hellcat is M14x1.5mm. A set of new wheel lug nuts is cost-effective insurance

The REFERENCE torque spec for a Dodge Challenger lug nut is 140-176 Nm. It is important to torque the wheel nuts properly, especially when replacing the wheels after