The Honda S2000 is a legendary sports car known for its incredible handling and performance capabilities. Many S2000 owners like to modify their cars with wider tires and wheels to enhance the look and improve grip. However, fitting wider tires on the S2000 often requires increasing the track width using wheel spacers. This raises the question – are wheel spacers safe for the S2000 and what size should you use? In this article, we’ll provide a complete guide to Honda S2000 wheel spacers including safety, legalities, sizing and top recommendations.
Is it safe to drive with Honda S2000 wheel spacers?
When installed correctly with high quality spacers, wheel spacers are generally considered safe for the S2000. However, there are some key factors to consider.
Buy hubcentric spacers that properly center the wheels to prevent vibrations. Low quality spacers can cause wheels to wobble at speed.
Use extended wheel studs/bolts to ensure proper thread engagement. The extra track width reduces stud engagement in the hub which can cause loosening.
Don’t exceed 1.5 inches of extra track width. More than this can overstress suspension components.
Check clearances around brakes, fenders, etc. Too much spacer offset can lead to rubbing and interference.
Use a reputable brand that follows proper engineering and manufacturing standards. Poor quality spacers may fail over time.
As long as you choose high quality spacers in the proper size and use extended studs, wheel spacers are a safe modification for the S2000 within reason. Always get a professional alignment after installation.
What size Honda S2000 wheel spacers are best?
The most common and recommended Honda S2000 wheel spacer sizes are:
Front: 15mm or 20mm
Rear: 20mm or 25mm
Going up to 30mm front and 35mm rear is about the maximum I’d recommend for a moderately lowered S2000 on stock fenders. Anything beyond 35mm starts to put a lot of stress on components. Make sure to measure carefully and account for any scrub radius changes. The goal is to achieve your desired fitment without compromising performance or safety. I suggest starting small if you’re new to wheel spacers. You can always add more later.
Are Wheel Spacers Legal?
Wheel spacers are street legal in most areas when installed correctly on factory wheels. However, some places have restrictions, especially for extreme track widths. Be sure to check your local laws. Wheel spacers should always use hubcentric rings to properly center the wheels and extended studs/bolts for proper engagement. Never install spacers without these. Use a shop to confirm proper fitment and torque if you have any doubts about the legality and safety.
Which Honda S2000 wheel spacers are best?
For Honda S2000 owners looking for quality, safe wheel spacers, I highly recommend the brand BONOSS.
- Precisely CNC machined from aircraft grade 6061-T6 aluminum for maximum strength.
- Available in a range of sizes from 15mm to 35mm to properly fit your needs.
- Hubcentric design properly centers wheels and prevents vibrations.
- Come with extended wheel studs/bolts depending on year and bolt pattern.
- Engineered to strict tolerances for proper wheel fitment.
BONOSS S2000 spacers are regarded by many owners as the highest quality and safest option. Their precise fit and rigidity gives confident performance with no vibrations or issues. For peace of mind when modifying your S2000’s track width, choose BONOSS.
Installing wheel spacers on your Honda S2000 can provide a wider, more aggressive stance if done properly. Focus on quality hubcentric spacers in 15-35mm sizes, extended studs/bolts, proper install, and alignment. This will ensure safe performance. For the best engineered S2000 spacers, choose industry leader BONOSS to take your car’s fitment to the next level.
