Do you want to give your Audi RS5 a more aggressive and sporty look? One of the simplest and most effective ways to achieve that is to install wheel spacers on your stock wheels. Wheel spacers are metal discs that go between the wheel hub and the wheel, pushing the wheel outwards and creating a wider stance. This not only makes your car look better, but also improves its handling, stability and brake clearance.
But how do you install wheel spacers on your Audi RS5? And what size of spacers do you need? In this post, we will answer these questions and show you how to install wheel spacers on your car. We will also suggest some of the best wheel spacers for your Audi RS5 that you can order online.
What are the benefits of installing Audi RS5 wheel spacers?
Making your car look more attractive: Wheel spacers can make your car look more appealing and sporty by filling the wheel wells and reducing the gap between the tire and the fender. This gives your car a smooth and sleek appearance that catches attention. • Improving the performance of your car: Wheel spacers can improve the performance of your car by widening the track width and reducing the body roll. This means that your car will have more traction and stability when turning, accelerating and braking. Wheel spacers can also help to adjust the offset of your wheels, which can affect the steering response and alignment of your car.
Creating more brake clearance for your car: Wheel spacers can create more brake clearance for your car by creating more room between the wheel and the brake caliper. This can prevent rubbing and overheating problems, especially if you have upgraded your brakes or installed larger wheels. Wheel spacers can also allow you to fit bigger brake rotors and pads for better braking power.
What size of Audi RS5 wheel spacers should you choose?
The size and offset of your stock wheels: The size and offset of your stock wheels determine how much space you have between the wheel hub and the fender. The offset is the distance between the centerline of the wheel and the mounting surface of the hub. A positive offset means that the wheel is closer to the fender, while a negative offset means that the wheel is farther away from the fender. The stock wheels for the Audi RS5 are 20×9 inches with a +26mm offset.
The look and fitment that you want for your car: The look and fitment that you want for your car depend on your personal taste and style. Some people like a subtle and flush look, while others like a more extreme and stance look. The flush look means that the edge of the wheel is aligned with the edge of the fender, while the stance look means that the edge of the wheel is beyond the edge of the fender. The flush look is more cautious and safe, while the stance look is more daring and may require fender rolling or trimming.
The legal rules in your area: The legal rules in your area may limit how much you can extend your wheels beyond the fender. Some states or countries have strict rules on how much poke or camber you can have on your wheels, which can affect your safety and visibility on the road. You should always check with your local authorities before installing wheel spacers on your car.
You might be wondering how to choose the right size of wheel spacers for your Audi RS5 based on these factors. We suggest using 15mm front spacers and 10mm rear spacers for your Audi RS5 if you want to get a flush look with stock wheels. These sizes will push out your wheels to fill the wheel wells without causing any rubbing or poking problems. However, if you prefer a more extreme look or have different wheels, you might need to change these sizes accordingly.
How to install Audi RS5 wheel spacers on your Audi?
Installing wheel spacers on your Audi RS5 is a fairly easy and quick process that you can do by yourself or with a friend. You will need some basic tools, such as a jack, jack stands, lug wrench, torque wrench, socket set, anti-seize compound and thread locker. You will also need some high-quality wheel spacers that match your car’s bolt pattern, hub bore and lug nuts or studs. Here are the steps to install wheel spacers on your Audi RS5:
- Park your car on a flat and level surface: Make sure that your car is parked on a flat and level surface with enough space around it. Engage the parking brake and chock the wheels that you are not working on. You may also want to loosen the lug nuts or studs slightly before lifting the car.
- Lift your car and remove the wheels: Use a jack to lift one corner of your car and put a jack stand under it for safety. Do this for the other corners until all four wheels are off the ground. Then, use a lug wrench to remove the lug nuts or studs and take off the wheels. Keep them in a safe place.
- Clean the wheel hub and the wheel spacer: Use a wire brush or a rag to clean the wheel hub and the wheel spacer of any dirt, rust or debris. Apply some anti-seize compound on the wheel hub to prevent corrosion and sticking. If your wheel spacer has a lip or a ring that fits into the wheel hub, make sure that it is aligned correctly and tightly.
- Install the wheel spacer on the wheel hub: Put the wheel spacer on the wheel hub and align the bolt holes. If your wheel spacer has studs, make sure that they are long enough to stick out through the wheel. If your wheel spacer has holes, make sure that they are big enough to fit over the existing studs. Use some thread locker on the threads of the studs or bolts and tighten them with a torque wrench according to the manufacturer’s instructions.
- Install the wheel on the wheel spacer: Put the wheel on the wheel spacer and align the bolt holes. If your wheel spacer has studs, use new lug nuts to secure the wheel. If your wheel spacer has holes, use your existing lug nuts or studs to secure the wheel. Use a torque wrench to tighten them in a star pattern according to the manufacturer’s instructions.
- Lower your car and check for clearance: Use a jack to lower your car and remove the jack stands. Check for any clearance issues between the wheel, tire, fender, brake caliper and suspension components. Make sure that there is no rubbing or interference when turning or driving. You may need to adjust the camber, toe or caster of your alignment if necessary.
- Enjoy your new look and performance: Well done! You have successfully installed wheel spacers on your Audi RS5. Now you can enjoy your new look and performance on the road.
Where to buy Audi RS5 wheel spacers online?
BONOSS is a reliable and distinctive brand that offers quality Audi RS5 wheel spacers for your car. You can click here to learn more about their products. BONOSS Audi RS5 spacers have some patented features that make them stand out from other brands.
High-quality material and workmanship. BONOSS Audi RS5 wheel spacers are crafted from 7075-t6 aluminum alloy, which is the best aluminum alloy for spacers. It is as strong as steel, but much lighter and rust-proof. All these spacers have a black anodized coating, which creates an oxide layer on the aluminum surface. This layer improves the durability, corrosion resistance and weather resistance of the spacers.
Active cooling grooves. Driving for a long time and at high speed can cause thermal degradation in many vehicles. This affects the brake performance and the driving quality. BONOSS Audi RS5 wheel spacers have five curved grooves on the surface, based on aerodynamics principles. These grooves create space for air to flow and cool down the heat generated by the brake. This design has been proven to help with heat dissipation and brake response improvement.
Easy to remove. If you live in a place where there is snow or salt, spacers can get stuck due to the mixture of moisture, minerals and salt. The removal grooves at the edge of BONOSS Audi RS5 wheel spacers solve this problem. You can use a screwdriver to take off the spacers easily.
