Whether you need to put 1-inch Mitsubishi Pajero spacers on the front and back really depends on your car. Most of the Pajero on the road today are 4-wheel-drive. It is necessary to have wheel spacers installed on all four tires. Because when the 4WD system works, the right amount of torque to each wheel is sent to minimize slippage and maximize control. If you install 1-inch Mitsubishi Pajero spacers on the front wheels, then you need to install spacers on the back wheels, too.
Every car would leave a certain wheel gap for slight changes in tire size. However, most cars look better when the wheel gap is not so pronounced and the tires are flush with the fender. By installing proper 1-inch Mitsubishi Pajero spacers on the front and back wheels, you can easily make the vehicle look sporty and aggressive. Besides, these 1-inch Mitsubishi Pajero spacers increase the track width hence improving stability. The contact points with the ground stand wider apart, increasing roll resistance. You will experience better handling of the curve.
What Type of 1-inch Mitsubishi Pajero Spacers Do I Need?
There are different 1-inch Mitsubishi Pajero spacers: bolt-on types and slip-on types. The bolt-on types come with wheel studs. They are bolted to the vehicle hubs and following the wheels are secured on the 1-inch Mitsubishi Pajero spacers with stock lug nuts. This allows you to achieve a full thread engagement without changing the stock studs. Because of this structure, they are usually thick in size, like 1-inch, 1.5-inch, or even 3-inch.
To ensure safety, we recommend forged 1-inch Mitsubishi Pajero spacers. BONOSS forged active cooling wheel spacers start as a solid block of billet aluminum. The continuous tons of pressure add strength and eliminate any porosity, shrinkage, and other micro-processes presented in the raw material. Therefore, BONOSS forged 1-inch Mitsubishi Pajero spacers are significantly lighter and stronger than cast ones.
Are BONOSS 1-inch Mitsubishi Pajero Spacers Worth It?
When choosing the 1-inch Mitsubishi Pajero spacers for brakes, there are some aspects you should take into consideration. In brief words, it would be even better if the spacers can solve the rubbing problem and provide more functions. BONOSS forged active cooling 1-inch Mitsubishi Pajero spacers improve brake cooling efficiency. The heat dissipation grooves send the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat, so it achieves the purpose of actively dissipating heat for the braking system.
Additionally, BONOSS 1-inch Mitsubishi Pajero spacers offer a 10-year warranty. This is because BONOSS is confident in the product’s functionality and quality. This 10-year warranty protects the customer’s interest and ensures product quality and safety. Each BONOSS genuine wheel spacer is “BONOSS engraved”. These Mitsubishi spacers are made in BONOSS’s own factory, so the quality is well guaranteed. And only genuine BONOSS 1-inch Mitsubishi Pajero spacers are covered by the 10-year warranty.
