Simply put, 18mm Tesla Model Y wheel spacers provide about -18mm wheel offsets. This is because 18mm spacers will push your wheels out 18mm which offers the same effect as a wheel with 18mm less offset than the stock wheels. If the offsets of aftermarket wheels are not correct, the handling can be adversely affected. In this case, 18mm Tesla Model Y wheel spacers will be your most cost-effective and quickest solution to fix the offset, giving your vehicle a more attractive look.
On some electric cars, installing 18mm Tesla Model Y wheel spacers will make the wheels and tires flush with the fenders properly. Many car technicians will agree that 18mm spacers will be a good idea to fit wider wheels and encounter clearance issues. This is effective to keep wheels and tires from rubbing against the fender and wheel well line. Follow the included instructions when installing these parts. These 18mm Tesla Model Y wheel spacers are exactly safe and beneficial.
Why Do You Need High-quality 18mm Tesla Model Y Wheel Spacers?
Quality means everything in 18mm Tesla Model Y wheel spacers. While you may consider that a simple and cheap wheel spacer is “just enough to use”, the fact is, lower quality means lower safety. Never skimp on price and end up with unsafe low-quality spacers. Quality is always a huge deal when it comes to the components you add to your electric SUV. In the market, 18mm Tesla Model Y wheel spacers made from aircraft-grade aluminum are the basis of quality fender spacers.
BONOSS 18mm Tesla Model Y wheel spacers are made of forged 6061-T6 or 7075-T6 billet aluminum. This ensures strength, service range, and safety as well as high resistance to corrosion. The super forging process makes the resulting 18mm Tesla Model Y wheel spacers perform better. It further enhances the hardness and toughness of the spacers. With the same material and cost, the strength and safety of BONOSS forged 18mm Tesla Model Y wheel spacers are far higher than those casting ones.
Can BONOSS 18mm Tesla Model Y Wheel Spacers Stuck?
Sometimes it is inevitable that you need to remove the entire wheels and 18mm Tesla Model Y wheel spacers to replace the brake system. Or you get the wheel spacers replaced. Whatever the reason, it seems that you have to remove the wheel spacers completely. Considering this, BONOSS 18mm Tesla Model Y wheel spacers are designed with disassembly grooves. The disassembly grooves mean the small notches which are distributed on the corner of wheel spacers. The notch leaves a limited clearance between the brake rotor and the spacer.
When removing the spacer, place a screwdriver into the notch and you can simply apply force at an angle to separate the spacer from the brake rotor. These notches make the whole removing process much easier. The BONOSS tech team has tested thousands of different vehicles for proper fitment. Our extensive database allows our sales staff to offer you the perfect 18mm Tesla Model Y wheel spacers for your vehicle. Take a look now!