The 2023 Honda Ridgeline wheel spacers are one of the most cost-effective solutions to stop tire rubbing, clear brake caliper interference, achieve a powerful stance, enhance the handling of curves and swerving, and more. This is done by creating more space between the wheels and the hub assembly. This is effective to prevent wider tires from contacting the inner suspension parts. These 2023 Honda Ridgeline wheel spacers make your off-roading machine perform better in 4×4 events.
Pushing the wheels outwards is actually enlarging the track width. As the track width increase, the rollover resistance improves. This is effective especially when you are driving in unfavored conditions. The contact points with the ground stand wider apart, creating better stability. Therefore, 2023 Honda Ridgeline wheel spacers increase the amount of cornering force, you will experience better handling in your off-road traveling.
How 2023 Honda Ridgeline Wheel Spacers Stop Tires From Rubbing Fender?
To keep the wider wheels and tires functioning correctly, people turn out using 2023 Honda Ridgeline wheel spacers. By moving the wheels out, spacers reduce the offset. However, if applied incorrectly, wheel spacers may cause rubbing issues. To make everything right, it is recommended to measure the wheel gap. Take a straight edge and place it against the outermost part of the rims/tires, then measure from the outside wheel to the fender line to see how much space you have available.
In most cases, a larger offset rim can be fitted under the guard by adjusting the wheel offset. As a general rule of thumb, wheel offset minus spacer thickness is the final offset of your vehicle. Giving an example, the perfect wheel offset is +20. And you have +55 offset wheels, to make these wheels fit wider fenders, you need 1.5-inch 2023 Honda Ridgeline wheel spacers. The lower the offset, the further the wheel is away from the vehicle hub. The further the wheel is away from the vehicle hub, the better the appearance.
Are 2023 Honda Ridgeline Wheel Spacers Hard to Remove?
You can remove the 2023 Honda Ridgeline wheel spacers for changing tires or brakes. It is as simple as mounting a wheel. To make the removal process easier, BONOSS wheel spacers come with disassembly grooves. There are some small notches that are distributed on the corner of the 2023 Honda Ridgeline wheel spacers. When the spacer fits on the brake rotor, each notch will leave a limited clearance between the rotor and the spacer. It is proved to be a useful design, which improves the disassembly efficiency greatly.
When removing BONOSS 2023 Honda Ridgeline wheel spacers, get a flat-head screwdriver and place it on one notch. Pound a hammer to the screwdriver at a 45-degree angle, and be gentle, but convincing, until it loosens. It should come off pretty easily. In addition, for BONOSS active cooling 2023 Honda Ridgeline wheel spacers, the grooves also effectively increase airflow, hence enhancing the heat dissipation effect. The more air can flow through the cooling grooves, the better the heat dissipation.
