The 2024 Subaru Outback wheel spacers recommended size specifications are 5×114.3, which refers to the bolt pattern. This means the wheel spacers have five lug nuts and a pitch circle diameter (PCD) of 114.3 millimeters. The bolt holes need to match the rotor’s setup to ensure that the clamping force can be maximized, and it is advisable to use dedicated wheel spacers with high precision for better vehicle stability.
The center bore diameter of the 2024 Subaru Outback wheel spacers is 56.1mm. Accurate center bore data is beneficial for creating a high-precision hub-centric fitment. The BONOSS AL7075-T6 Active Cooling wheel spacers, designed specifically for the Subaru Outback BS/BS Facelift VI Gen (2014+), utilize a multi-stage hub-centric design, ensuring a tight and vibration-free fit to the vehicle’s wheel hub. Hub-centric spacers center the wheels perfectly on the hub, minimizing the possibility of wheel wobbling or vibrations during high-speed driving.
What 2024 Subaru Outback Wheel Spacers Are Best?
BONOSS offers 2024 Subaru Outback wheel spacers with bolt holes featuring a full-cone seat design, and for the 15mm version, a special cone seat is provided. This design choice offers several benefits, as it fully helps the lug nuts fit against the seat. When torque is applied using a torque wrench, the lug nuts experience even force distribution and are less prone to loosening during driving. To further ensure a secure fitment, the lug nuts are made from forged 40Cr steel, with a grade rating of 10, enabling them to withstand higher torque levels.
The material used for the BONOSS 2024 Subaru Outback wheel spacers is forged aluminum alloy. Customers can choose between two types of aluminum alloy: the industry-standard 6061-T6 and the high-performance version, 7075-T6, exclusively provided by BONOSS. Both versions offer an optimal driving experience.
The standard 6061-T6 alloy boasts a tensile strength of 42,000-45,000 psi and yield strength of 35,000-40,000 psi, while the high-performance 7075-T6 alloy surpasses the standard version’s performance by approximately 40%. BONOSS ensures transparency and customer confidence by employing a visual material standard. Each wheel spacer has the alloy type laser-printed on its surface, allowing customers to verify the material used.
(Some photos come from our clients, if there is any infringement, contact us immediately to delete them.)
