When modifying the 2024 Toyota Corolla wheel spacers, an important factor to consider is whether longer wheel studs are required. Wheel spacers are installed between the hub and the wheel, pushing the wheel outward to achieve a more aggressive stance. They are typically used to enhance vehicle posture, improve handling, and allow for the installation of larger or wider wheels and tires. However, using wheel spacers necessitates tightening wheel studs, which raises the question of whether longer studs are needed.

The length of the wheel studs in the Toyota Corolla is designed to accommodate the spare wheel and its respective offset. Installing 2024 Toyota Corolla wheel spacers effectively increases the offset, pushing the wheel away from the hub. This positional offset may cause the wheel’s lug nuts to have insufficient thread engagement with the stock studs, potentially compromising the integrity of the wheel attachment. This situation may occur in slip-on-type products.

How Long Wheel Studs Do 2024 Toyota Corolla Wheel Spacers Need?

To ensure proper installation and safety of the wheels, using wheel spacers with longer wheel studs when using slip-on 2024 Toyota Corolla wheel spacers is recommended. The specific requirements depend on factors such as the thickness of the spacers, the type of wheel spacers, and the length of the original wheel studs. Ideally, the studs should have sufficient thread engagement to fasten the lug nuts securely.

When using slip-on 2024 Toyota Corolla wheel spacers, replacing the wheel studs with longer ones is necessary. The length of the wheel studs should be the thickness of the wheel spacers added to the stock wheel studs. For example, if the stock wheel studs are 37mm long and you are using 10mm wheel spacers, you will need to replace them with a set of wheel studs that are 37mm + 10mm = 47mm long. Additionally, the grade of these wheel studs must be equal to or greater than the grade of the stock wheel studs to ensure the additional forces on the components are properly handled.

Do 2024 Toyota Corolla Wheel Spacers Need Longer Wheel Studs?

Do 2024 Toyota Corolla Wheel Spacers Need Longer Wheel Studs?

When using bolt-on type 2024 Toyota Corolla wheel spacers, there is no need to replace the wheel studs because the stock wheel studs will pass through the wheel spacers and be secured by lug nuts, while the components on the wheel spacers secure the hub. The situation related to wheel studs may arise if the stock wheel studs are too long and cannot fit into the wheel pocket, in which case it would be necessary to trim the stock wheel studs. The solution could be trimming the wheel studs or opting for thicker wheel spacers.

Bolt-on 2024 Toyota Corolla wheel spacers with a thickness of 20mm or more will avoid the mentioned situation.

When considering the use of 2024 Toyota Corolla wheel spacers, selecting the appropriate spacer thickness and type for your specific application is crucial. BONOSS offers slip-on and bolt-on products. Slip-on wheel spacers come with longer wheel studs of 12.9-grade fatigue resistance for installation, while bolt-on wheel spacers provide 12.9-grade wheel studs and lug nuts. BONOSS’s unique Active Cooling patent provides customers with additional product value.

In summary, whether you need longer wheel studs for 2024 Toyota Corolla wheel spacers depends on the thickness and type of spacers you use. BONOSS recommends choosing a complete set of 2024 Toyota Corolla wheel spacers, as the manufacturer will consider all the forces and component performance to prioritize your driving safety.

(Some photos come from our clients, if there is any infringement, contact us immediately to delete them.)

BONOSS-Forged-Active-Cooling-Hubcentric-Wheel-Spacers-5-Lugs-Wheel-Adapters-Main-Images-1
BONOSS-Forged-Active-Cooling-Hubcentric-Wheel-Spacers-5-Lugs-Wheel-Adapters-Main-Images-1