The best size of the all-new 2024 Toyota Tacoma wheel spacers will fit your vehicle hub perfectly and provide a cool flush stance. Truly, vehicle-specific Tacoma TRD Pro spacers are considered to be the safest spacers. They are machined to your vehicle specification, which ensures perfect fitment. For instance, the bolt pattern of an all-new 2024 Toyota Tacoma TRD/ Pro/ Trailhunter/ Off-Road/ Limited/ PreRunner is 6×139.7mm (6×5.5”). So, you would need 6×139.7 wheel spacers to fit. The second thing to consider is the thickness. Generally, if the wheel gap is about 30mm, then installing 30mm 2024 Toyota Tacoma wheel spacers all around doesn’t cause any rubbing issues.
Quality 2024 Toyota Tacoma wheel spacers are exactly safe but only if you install them properly. The recommended torque spec of 2024 Toyota Tacoma wheel spacers would be mentioned in the manufacturer`s manual or on official Internet sources. Set the torque wrench to the correct value. Then simply turn the wrench handle until it reaches the torque mark. Then, tighten the wheel nuts a quarter turn at a time following the crisscross sequence (in a “star” pattern). This ensures that the 2024 Toyota Tacoma wheel spacers are forced evenly.
Do 2024 Toyota Tacoma Wheel Spacers Hurt the Suspension?
Quality brand 2024 Toyota Tacoma wheel spacers won’t hurt the suspension. In fact, they are no different than some low-offset wheels. In other words, spacers cause no more damage than offset wheels. After installing the 2024 Toyota Tacoma wheel spacers, park the car on flat ground, rotate the steering wheel to one extreme position, and inspect the wheel well of the tire that’s outside. If there are not any rubbing signs, then these 2024 Toyota Tacoma wheel spacers will not damage your vehicle.
BONOSS forged active cooling 2024 Toyota Tacoma wheel spacers are CNC machined with precision at 0.02mm tolerance. This improves the fit and functionality of spacers. High-precision 2024 Toyota Tacoma wheel spacers also look better. For instance, a wheel spacer with a high-quality surface is easier to sit flush up against the vehicle hub and wheel. So, there’s no obvious gap between the wheel hub and the spacer. This is helpful to avoid high-speed wheel vibration. That is to say, BONOSS precise 2024 Toyota Tacoma wheel spacers don’t hurt your vehicle.
Do 2024 Toyota Tacoma Wheel Spacers Break Studs?
Since the 2024 Toyota Tacoma wheel spacers are bolted onto the vehicle wheel studs, many people worry that spacers may break studs, Actually, no, the load from the wheel is transferred to the axle/hub through the friction of the clamped joint, not through the wheel studs. And the wheel studs can only break if the lug nuts are not properly torqued. In other words, by properly torquing genuine brand 2024 Toyota Tacoma wheel spacers, there will be no problems.
BONOSS provides ISO grade 12.9 wheel studs to ensure quality exceeds OEM standards. High-strength wheel studs and nuts ensure a strong wheel-spacer-hub connection. The provided wheel studs of BONOSS 2024 Toyota Tacoma wheel spacers are made of high-strength forged SCM440 alloy steel. They have achieved ISO standard grade 12.9, tensile strength≥ 1,220 MPa, ultimate tensile load ≥ 152,000 N, and hardness (HV) ≥ 395. With higher strength, your 2024 Toyota Tacoma wheel spacers can bear more force without breaking.
