When choosing a new set of 2025 Chevy Silverado lug nuts, a comprehensive lug nut guide is very useful. Truck wheel lug nuts come in different sizes, styles, and colors. Depending on the wheel or application, the type of lug nut you need may vary. This lug nut size chart contains a list of 2025 Chevy Silverado wheel nut ranges, alongside the various lug patterns, torque specs, socket sizes, and seat types.
1995-2025 Chevy Silverado Lug Nut Size Chart
| Model | Thread Pitch | Hex Size | Seat Type | Torque Spec | Lug Pattern |
|---|---|---|---|---|---|
| ’95-’99 Silverado I | M14x1.5mm | 22mm (13/16”) | Conical seat | 140 Nm (103.5 ft-lb) | 5x127mm |
| ’14-’18 Silverado III | M14x1.5mm | 22mm (13/16”) | Conical seat | 140 Nm (103.5 ft-lb) | 6×139.7mm |
| ’19 & Newer Silverado IV | M14x1.5mm | 22mm (13/16”) | Conical seat | 140 Nm (103.5 ft-lb) | 6×139.7mm |
In short, the most common sizes of the lug nuts on a 1995-2025 Chevy Silverado truck are M14x1.5mm thread size, 13/16” (22mm) hex, and conical seat. There is no doubt that the OEM lug nuts fit the stock wheels perfectly. But when changing to new aftermarket wheels, the old lug nuts may not fit the new wheels. In this case, a new set of aftermarket 2025 Chevy Silverado lug nuts will be the best solution.
What is the Torque on a 2025 Chevy Silverado Lug Nut?
The recommended 1995-2025 Chevy Silverado lug nut torque spec is 140 Nm (103.5 ft-lbs.). This is just a reference value. Some wheels or applications require more or less tightening torque. It’s best to check your vehicle’s manual or consult a professional to find out the exact specifications before operating. You should also properly retorque the new lug nuts after driving 50 to 100 miles.
Common OEM Chevy Silverado lug nuts are made of steel, which offers proper strength. But you deserve better. BONOSS exclusively offers new forged 50BV30 steel truck lug nuts. These wheel nuts are ISO grade 12 approved. The proof load is up to 105,700N. It makes sense that stronger wheel nuts are safer because they are not easy to break. For most off-roading trucks, a set of high-quality steel black lug nuts is a good idea.
What Size Socket is a 2025 Chevy Silverado Lug Nuts?
The socket size of a lug nut on a 2025 Chevy Silverado truck is 22mm (13/16”). The hex sockets are commonly used to tighten or loosen wheel lug nuts. If your Chevy Silverado truck comes with OEM wheel locks, then a special key socket may be stored in the glove compartment, center console storage, storage box, or trunk. A wheel lock key is a special socket that specific match your wheel locks.
Without the wheel lock key, it is hard to remove the black Chevy Silverado wheel locks. In this case, the BONOSS forged 50BV30 Chevy Silverado lug nut kit provides 4 heptagon wheel locks and a corresponding 7-side shape key. Wheel locks are useful to prevent the wheels from theft. Undergone a special surface treatment, these BONOSS forged 50BV30 steel lug nuts & wheel locks give neutral salt spray resistances exceeding 500 hours. They won’t rust after many years.
Are 2025 Chevy Silverado Lug Nuts Metric or Standard?
Yes, almost all 2025 Chevy Silverado lug nuts are metric sizes. The most common metric size of a Chevy Silverado lug nut is M14x1.5mm. The easiest way to find the correct thread size is in your owner’s manual. It is also a good idea to take another matching lug nut to a tire shop and match it up by threading it on. If it fits, then you can figure out what size it is.
What Kind of Lug Nuts Does a Chevy Silverado Use?
The 1995-2025 Chevy Silverado car uses M14x1.5mm conical seat type lug nuts. The lug nut seat is where the nut meets the wheel lug hole. Different lug seat types are available from different manufacturers and applications. Commonly, there are three seat types of wheel nuts: conical types, ball types, and flat types. Only the seat types match can your new wheels be properly mounted.
BONOSS Forged 50BV30 Lug Nuts
For 2014-2025 Silverado 6 Lug Wheels
For 1995-1999 Silverado 5 Lug Wheels
