Installing 4WD wheel spacers is actually a good way to improve the driving experience. The before and after effect is obvious. By increasing the track width, the contact points of tires are expanded, which results in more stability and smoothness. This also improves the rollover resistance. In addition, widening the track gives your car an exaggerated, sporty, and powerful look.
There is a vast variety of wheel spacers in the automotive world, from cheap knock-offs to genuine high-end forged ones. Brand manufacturers develop the latest and greatest products. In this post, we will discover the best 4WD wheel spacers for the daily commuters or even a patch of off-roading now and again.
What Are 4WD Wheel Spacers Torque Specs?
Installing wheel spacers on a 4WD car is not a difficult task, but it requires some tools and skills. You need to follow the instructions from the manufacturer and use a torque wrench to tighten the lug nuts to the specified torque values. Here is the REFERENCE torque spec on the 4WD wheel spacers:
- M14 bolts or wheel nuts: 103.5 lb-ft (140 Nm).
- M12 bolts or wheel nuts: 83.3 lb-ft (113 Nm).
For some wheels or applications, you may need more or less tightening torque. So, it’s best to consult a tire specialist to ensure the exact torque spec before operating.
4WD Wheel Spacers Installation Pro Tips
- Lift the car and remove the wheels;
- Clean the entire hub surface, ensuring it is clean and smooth;
- Place the spacer on the hub and ensure it is firmly seated and flush against the hub;
- Use a good torque wrench to tighten the wheel spacers to proper torque specs.
- Then remount the wheel on the spacer and fasten it with stock lug nuts.
- After installing 4WD wheel spacers, check and confirm the proper alignment and function.
Who Sells the Best 4WD Wheel Spacers Near Me?
Safety, precision, strength, and best experience are what sets apart BONOSS from other spacers manufacturers. For anyone seriously considering the performance potential of their cars, heat dissipation is something that should not be overlooked. BONOSS offers several key advantages that make their spacers a top choice.
1. Active Cooling for Better Experience
BONOSS forged active cooling 4WD wheel spacers come with heat dissipation grooves. When rotating, these grooves allow the air to flow between the spacers and brake rotors. The air takes away the heat to actively dissipate heat for the braking system. These BONOSS forged active cooling car spacers boost the cooling efficiency, reduce brake thermal decay, and improve road safety.
2. Forged Aluminum for Improved Durability
All BONOSS forged active cooling 4WD wheel spacers are made of top-quality 6061-T6/ 7075-T6 aluminum alloy. The tensile strength is up to 572 MPa, and the yield strength is up to 503 MPa (AL7075-T6). The forging process eliminates the porosity, ensuring structural integrity. This makes them not easy to break.
3. Strong Fasteners for Enhanced Stability
When it comes to safe 4WD wheel spacers, wheel lugs are important. The provided BONOSS wheel studs are made of high-strength forged SCM440 alloy steel. These wheel studs are approved by over 75 SGS TÜV authoritative certification reports:
- Tensile strength≥1,220 MPa;
- Limited life range test≥2,000,000 stress cycles without damage;
- Ultimate tensile load≥152,000 N;
- Hardness (HV)≥395;
- Neutral Salt Spray≥500H.
Frequently Asked FAQ
Q: Are 4WD wheel spacers safe?
A: As long as you use quality hub-centric set, these 4WD wheel spacers are safe in off-roading adventures. Make sure they are properly installed by knowledgeable mechanics.
Q: Should I lube the lug nuts?
A: When installing the 4WD wheel spacers, it is optional to Loctite the lug nuts. As long as you use quality brand wheel spacers and properly torque them, they won’t come loose easily.
Q: Do I need 4WD wheel spacers on all 4 tires?
A: If you want to keep the same front and rear wheel style, you need to install four wheel spacers for all 4 tires.
In Summary: Safely Boost Your Car’s Performance with BONOSS
With BONOSS’s innovative active cooling technology, superior forged materials, and certified quality, BONOSS forged 4WD wheel spacers are undoubtedly the best choice for your wheel style upgrading project. Choose BONOSS and experience the difference—engineered for those who demand the best.
(Hi, I’m Kevin Brian, a 30-year mechanical engineer. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial Intelligence (AI) Models or tools.)
