When it comes to the best Ford Ranger wheel spacers, compatibility cannot be overstressed. This wheel fitment guide contains tailored information for bolt pattern (PCD), center bore (CB), various sizes, offsets, and spacer selection specific to the Ranger wheels. Be sure to get the correct spacers for your Ford Ranger- 6×5.5” or 6×139.7mm bolt pattern and 93.1mm hub bore size.
Factory 2011-2025 Ford Ranger wheel spacer sizing:
Stock Rim Size: 7Jx16 to 8Jx20
OEM wheel offset: +30 to +55 Offset
Reference flush wheel spacer size: front 30mm or 35mm / rear 35mm or 40mm
Bolt pattern (PCD): 6×139.7mm
Center bore (CB): 93.1mm
Lug bolt spec: M12x1.5mm
Using Ford Ranger wheel spacers that don’t precisely fit the wheel hub specifications can lead to many fitment troubles, such as some nasty vibrations. 1.25-inch wheel spacers are perfect for those who want to fill the wheel wells without dramatically changing the truck’s OEM stance. 2-inch wheel spacers push the wheels further, providing a truly aggressive look.
What is the Torque Spec on Ford Ranger Wheel Spacers?
The REFERENCE torque spec of 2011-2025 Ford Ranger wheel spacers would be 113 Nm or 83.3 Ft-lb (always inquire with a tire expert before operating). Proper wheel torque sequence is critical for installation and to ensure safety on the road. To ensure an even clamping force, you need to use a good calibrated torque wrench to tighten each lug nut in the correct sequence. The lug nut should move at least a quarter turn before you arrive at the final torque.
What’s better, at the same price as other brand spacers, BONOSS forged active cooling Ford Ranger wheel spacers come with more advantages. For example, the global registered active cooling technique. These BONOSS forged active cooling wheel spacers come with heat dissipation grooves. Distributed in petal shape, these grooves allow the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat, so it achieves the purpose of actively dissipating heat for the braking system.
What is the Bolt Pattern on 2011-2025 Ford Ranger Wheel Spacers?
The 2011-2025 Ford Ranger comes with a 6×139.7mm or 6×5.5” bolt pattern. The wheel bolt pattern (also known as PCD) is one of the most important things to consider when shopping for new wheel spacers. Making sure that the lug pattern of the Ford Ranger wheel spacer lines up perfectly with the specific Ranger wheel hub is incredibly important. Because you can only install alloy rim spacers and wheels that match the vehicle-specific bolt pattern.
But with a wheel adapter, this won’t be the gold rule. As we know, aftermarket wheels come with various bolt patterns, offsets, and hub bores. Wheel adapters can change these factors easily and safely. They come with two sets of bolt patterns. One set is made to the vehicle specification and the other set is machined to another wheel lug pattern. For example, by using a 6×139.7 to 6×135 wheel adapter, you can put 6x135mm wheels on a Ford Ranger quickly and safely.
How Much Does a Ford Ranger Wheel Spacer Cost?
Brand-new wheel spacers for your Ford Ranger wheel can range in cost from $149.99 to $335.99+, depending on the spacer size and material you select. Always choose genuine brand Ford Ranger wheel spacers. Because genuine brand products offer top quality, safety, and reliability. They are usually backed by certain warranties and provide excellent customer support.
Do Ford Ranger Wheel Spacers Affect 4WD or 2WD?
The Ford Ranger wheel spacers have zero effect on the rear-wheel drive (2WD) or 4-wheel drive system (4WD). Wheel spacers are almost the same things as many low-offset wheels. These items will make the tires protrude outwards more than the OEM set. As long as you install them properly, high-quality wheel spacers won’t destroy the wheel bearing or mess up alignment. Make sure you get hub-centric wheel spacers.
Well-produced Ford Ranger wheel spacers will fit your vehicle precisely. For example, BONOSS forged active cooling wheel spacers come with multi-stage hub-centric rings. The hub-centric metal ring is machined to be multi-layers, and the bevels fit the corresponding hub flange, which eliminates any possible gaps. The precision is within 0.02mm tolerance. These precise BONOSS forged active cooling wheel spacers effectively reduce the chance of vibration.
