The Toyota 5×114.3 to 5×120 wheel adapters change lug pattern, which expands your wheel options. Get a good set of aftermarket wheels, but the bolt patterns don’t fit? You do not have to give them up. In fact, wheel adapters can fix it quite simply, so you don’t have to get another set of new wheels. That will save a lot of budget and time.
Can you redrill 5×114.3 to 5×120? The answer is NO. It is not recommended to redrill the wheel lug holes. Drilling lug holes can weaken the wheel, leading to potential risks. Using proper wheel adapters is the best way. For example, the Toyota 5×114.3 to 5×120 adapters allow you to safely put Tesla 5×120 wheels on a GR Corolla.
Toyota 5×114.3 to 5×120 Adapter Size Chart
As long as you install them properly, high-quality 1-inch to 2-inch PCD adapters are safe to use. Here are the pros and cons of each size:
- 1-inch: Start to deliver noticeable stance changes and improved stability.
- 1.25-inch: Offers a noticeable stance difference and helps in accommodating wider tires.
- 1.5-inch: Makes your car look more powerful and enhances the ride quality.
- 2-inch: Allows you to fit a wide-body kit while keeping the stock wheels.
Choosing the Right 5×114.3 to 5×120 Adapters
Most motorists purchase wheels based on the looks but overlook the bolt patterns and offsets. The wheel adapters can fix this issue, but don’t get the wrong adapters. Here are two core factors:
Bolt Pattern:
Wheel fitment requires the wheel bolt pattern to match the vehicle hub. Double-check the vehicle bolt pattern in your owner’s manual before buying a set. For example:
- Toyota GR Corolla (2022-2025): PCD=5×114.3mm, CB=60.1mm, Thread=M12x1.5mm.
- Lexus RC (2014-2025): PCD=5×114.3mm, CB=60.1mm, Thread=M12x1.5mm or M14x1.5mm.
- Lexus RX (1997-2025): PCD=5×114.3mm, CB=60.1mm, Thread=M12x1.5mm or M14x1.5mm.
- Lexus GS (1993-2020): PCD=5×114.3mm, CB=60.1mm, Thread=M12x1.5mm.
Correct Offset:
Wheel spacers reduce the offset. Example: if your stock wheel offset is +30mm, then a 25mm spacer will make the final offset +5mm.
Who Sells the Best Toyota 5×114.3 to 5×120 Adapters?
Safety, precision, strength, and best experience are what sets BONOSS apart from other adapter manufacturers. All BONOSS forged active cooling 5×114.3 to 5×120 adapters are built strictly to meet international standards that can improve the quality of your own driving experience. BONOSS offers several key advantages that make their adapters a top choice.
1. Active Cooling for Better Performance
BONOSS forged active cooling Toyota 5×114.3 to 5×120 adapters are designed with petal-shaped grooves. The grooves allow the external cold air to flow continuously inside the spacer when it rotates. The air takes away the heat, actively dissipating heat for the braking system. You can use genuine BONOSS brand wheel spacers for racing events safely and confidently.
2. Strong Fasteners for Enhanced Stability
To ensure safety, BONOSS provides ISO grade 12.9 wheel studs. They are all approved by over 73 SGS and TÜV authoritative certification reports.
- Tensile strength≥1,220 MPa;
- Limited life range test≥2,000,000 stress cycles without damage;
- Ultimate tensile load≥152,000 N;
- Hardness (HV)≥395;
- Neutral Salt Spray≥500H.
3. Hard Anodizing for Improved Durability
All BONOSS forged hub-centric Toyota 5×114.3 to 5×120 PCD adapters are made of 6061-T6/ 7075-T6 aluminum alloys. These BONOSS forged active cooling aluminum wheel spacers are hard-anodized to resist corrosion. A proper hard anodizing coating ensures complete protection against corrosion so that they can work well for a long time without any problems.
Frequently Asked FAQ
Q: Are 5×114.3 to 5×120 adapters legal?
A: Generally, the Toyota 5×114.3 to 5×120 adapters are legal and allowable in most countries and regions. The legality of wheel adapters varies depending on the country, state, or region you reside in, but quality wheel adapters with proper installation are basically legal.
Q: Can bolt pattern 5×114.3 fit 5×120?
A: Yes, by using a 5×114.3 to 5×120 wheel adapter, you can fit BMW 5×120 wheels on a Toyota car with 5×114.3 bolt pattern.
Q: How often should you tighten wheel nuts?
A: It is crucial to re-tighten your new wheel nuts after the first 50 to 100 driving miles. Then, just re-torque them every routine tire maintenance. Checking every 3,000 to 5,000 miles can help maintain optimal safety.
In Summary: Safely Boost Your Car’s Performance with BONOSS
From advanced active cooling advantages to customizable solutions and certified quality, BONOSS forged Toyota 5×114.3 to 5×120 adapters are designed to provide a safe, reliable, and enhanced driving experience. Choose BONOSS and experience the difference—engineered for those who demand the best.
(Hi, I’m Kevin Brian, a 30-year mechanical engineer. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)
