The BMW F30 wheel spacers are essential for your stance improvement. Whether you’re just looking to give your car a hellaflush stance or improve your car’s handling, wheel spacers will be your safe and easy solution. Although we are always recommended to buy new offset wheels to fit the widebody kit, sometimes we have to admit that it’s easier said than done if a bargaining issue (like limited budget) arises. Alternatively, if you’re running a limited budget, and would like to stick with the current rims, then F30 spacers can provide an obvious upgrade to your vehicle. By using BMW F30 spacers, the wheels are pushed outwards a bit, this provides a more sporty and aggressive look for your BMW 3 Series.
Is It Safe to Run 35mm Wheel Spacers?
Usually, 5×120 35mm spacers are used on widebody cars. Make sure they are not too much for your BWM 3 Series. If you have a straight edge metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size BMW spacer you will need to achieve the look that flushes or nearly flushes with the fender. If the result is far below 35mm, then change to thinner 5×120 wheel spacers. Too thick, the tires may hit the fenders. If you installed them properly, 35mm wheel spacers are exactly very safe to use and will not cause any vibration.
It is recommended to get your BMW wheel spacers installed at a reputable wheel shop. To ensure safety, the wheel bolts need to be torqued properly. Untightened wheel bolts or overtightened wheel bolts will cause most lug failures. This will cause the wheels to lose balance, resulting in vibration. It is important to double-check whether all the wheel bolts are tightened to the manufacturer’s specification with a properly calibrated torque wrench. Find a suitable balance in the level of tightness and the stud will remain strong, providing the greatest possible force to keep the wheel attached to the hub. Done correctly, 5×120 35mm wheel spacers will make your vehicle even safer and better!
Why Do You Need 5×120 Hubcentric Wheel Spacers?
Since 35mm BMW wheel spacers will push your wheels further outwards, we recommend using precise F30 hub-centric wheel spacers. BMW hubcentric wheel spacers allow the wheel to support the vehicle’s weight and fill the remaining space for a more tightly fit, reducing vibration, so they are considered safer. This kind of 5×120 spacers is centered by the center metal ring. In this way, the wheels are centered by the hub connection and the lugs can hold them flush against the brake rotors. This allows the wheel to support the vehicle’s weight and fill the gap for a more tightly fit, reducing high-speed vibration.
Where to Buy BMW 5×120 Wheel Spacers Near Me?
- BONOSS has BMW 5×120 wheel spacers 3mm-20mm in stock. We also offer non-normal thickness’s customized service, completed only in 1-3 days, 3mm-160mm thick is available, OEM/ODM is available. Common requests from our customers include PCD conversion, CB conversion adapters for aftermarket wheels (e.g., 74.1 to 72.6 adapter, BMW wheel adapters 5×120 to 5×112, BMW 4×100 to 5×120 wheel adapters).
- The thread pitch of the BMW F30 is M14x1.25. BONOSS BMW extended wheel bolts have fully SGS, TÜV ISO Grade 12.9 certified, tensile strength≥1,282Mpa, limited life range test≥2,000,000 stress cycles without damage, ultimate tensile load≥152,000N, hardness (HV)≥395, NSS≥192H. 27mm – 75mm wheel bolts are available to fit your wheel spacers mod.
- BONOSS BMW 5×120 hubcentric Wheel Spacers are 10 Years Worry-free Warranty, which is an excellent and cost-effective choice for wheel upgrades. Professional production experience and excellent product quality make us confident to provide a Super Long Warranty Service up to 10 years that far exceeds the period of most brands.
Interested in purchasing? Click HERE to know more!
