The Tesla Model X wheel spacers are useful to boost the whole driving experience. Nobody wants the car to look like there’s a huge hole in the fender. If you have high offset wheels, proper 5×120 wheel spacers would make them fit. By pushing the wheels out, Tesla Model X wheel spacers reduce ET/offset. To some extent, adding wheel spacers provides the same effect as lower offset wheels.
What sizes of Tesla Model X wheel spacers do need? Well, that depends on how much wheel gap you have. For OEM Tesla Model X wheels and tires, front 15mm & rear 20mm spacers provide the perfect flush stance. Besides, using the brand Tesla Model X wheel spacers is also important.
BONOSS active cooling Tesla Model X wheel spacers are designed with heat dissipation grooves to make brake cooling better. Distributed in petal shape, these grooves allow the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat, so it achieves the purpose of actively dissipating heat for the braking system. There are small notches that are distributed on the corner of Tesla Model X wheel spacers. These notches act as air collectors which tremendously enlarges the airflow, enhancing the heat dissipation effect, and improving road safety.
How to Measure Tesla Model X Wheel Spacers?
It is easy to measure the Tesla Model X wheel spacers. Place a straight stick in contact with the outermost tire, and keep it flush and level with the tire. Use a straight edge in millimeters to measure from the inside of the stick to the inner fender lip. Make sure that you are measuring the space where the wheel and tire are closest to the fender. For instance, if you get 15mm wheel clearance, you may need 15mm Tesla Model X wheel spacers to bring the wheels flush with the fender flares.
How Should Tesla Model X Wheel Spacers Be Torqued To?
In most cases, your Tesla Model X wheel spacers installer will have a recommended torque number. If you cannot find the vehicle manufacturer’s recommended torque spec, you can use the following as a reference: 140NM (103.5 Ft-tb) for aluminum wheels (just a REFERENCE, always inquire with a tire expert before operating). All BONOSS Tesla Model X wheel spacers are made of top-quality forged 6061-T6 and 7075-T6 aluminum alloys. The tensile strength is up to 572 MPa and the yield strength is up to 503 MPa (as strong as aviation aircraft). The higher the strength, the better the performance, and the safer.
